projector retro fit question

Old 06-28-2012, 09:52 PM
  #1  
Intermediate
Thread Starter
 
blue02S's Avatar
 
Join Date: May 2012
Location: Fayetteville, Arkansas
Posts: 46
Received 1 Like on 1 Post
projector retro fit question

I have an 02 tl-s and I have read the diy. However all he says is to use factory projectors. I would like to know what size the projectors are. Since factory projectors I jave found are costly. I have a friend that gets aftermarket stuff and does this type of thing on the side. He can help but wants to know what size they need to be before we start
Because this is my daily driver I wont be able to just take them apart and let it sot for a few days while I wait on shipping. Thanks for any help.
Old 06-28-2012, 10:00 PM
  #2  
Senior Moderator
 
fsttyms1's Avatar
 
Join Date: Aug 2002
Location: Appleton WI
Age: 49
Posts: 81,383
Received 3,063 Likes on 2,119 Posts
you can use any projector you want. Some will take more customizing than others. Some of the Bixenon are larger and you may have to modify more. Go to the retrofit source and see what they have. they have great stuff.
Old 06-28-2012, 10:29 PM
  #3  
Intermediate
Thread Starter
 
blue02S's Avatar
 
Join Date: May 2012
Location: Fayetteville, Arkansas
Posts: 46
Received 1 Like on 1 Post
Well if I can use anything. Which size would be best?
Old 06-28-2012, 10:40 PM
  #4  
Intermediate
Thread Starter
 
blue02S's Avatar
 
Join Date: May 2012
Location: Fayetteville, Arkansas
Posts: 46
Received 1 Like on 1 Post
I looked at retrofit and the bixenon os a 3 inch. Is bigger better or would a smaller unit produce a better beam?
Old 06-29-2012, 07:03 AM
  #5  
deal with it
iTrader: (2)
 
dreem1er's Avatar
 
Join Date: Dec 2006
Location: Miami
Age: 39
Posts: 5,193
Received 378 Likes on 316 Posts
The out put on a projector has more to do with the lens, I've had a set of 04 tsx projectors for many years, got them for free from body shop, as i was looking for some shrouds recently i read that the 1g tsx projector is one of the best factory projector, better than the s2000 tsx are they are 2.5

You could always buy projectors and swap the lens, a lens can get expensive, it would be cheaper to get a better set of projectors then to start swapping lenses
Old 06-29-2012, 07:23 AM
  #6  
J-series addict
iTrader: (4)
 
yungone501's Avatar
 
Join Date: Aug 2011
Location: Plano, Tx
Posts: 2,363
Received 614 Likes on 464 Posts
It all comes down to personal preference. Are you more concerned with looks (colorband, color flicker, etc...), performance (output, width, etc...), or a combination of both?
Old 06-29-2012, 09:07 AM
  #7  
Senior Moderator
 
fsttyms1's Avatar
 
Join Date: Aug 2002
Location: Appleton WI
Age: 49
Posts: 81,383
Received 3,063 Likes on 2,119 Posts
The TL Bixenon is known to be one of the best. There is better glass available for most projectors. I bought the zkw lenses for mine (audi headlight conversion). I still have yet to pull the head lights apart to swap but fully plan on it. HID planet is a great source for more info.
Old 06-29-2012, 09:21 AM
  #8  
Intermediate
Thread Starter
 
blue02S's Avatar
 
Join Date: May 2012
Location: Fayetteville, Arkansas
Posts: 46
Received 1 Like on 1 Post
Well looks are not tje main concern. I have 12000 k bulbs and am changing to 55w ballasts so color band isn't important. looking to try and get a better beam mostly
Since I now have a d2c bulb in a reflector housing.
Old 06-29-2012, 09:51 AM
  #9  
Senior Moderator
 
fsttyms1's Avatar
 
Join Date: Aug 2002
Location: Appleton WI
Age: 49
Posts: 81,383
Received 3,063 Likes on 2,119 Posts
Originally Posted by blue02S
Well looks are not tje main concern. I have 12000 k bulbs and am changing to 55w ballasts so color band isn't important. looking to try and get a better beam mostly
Since I now have a d2c bulb in a reflector housing.
Clear lenses arent about looks, its about light output. If all You want better light output get rid of the crap tastic 12k and get something useable like 5k. Blue doesnt look cool or help you see better
The following users liked this post:
dreem1er (06-29-2012)
Old 06-29-2012, 10:16 AM
  #10  
deal with it
iTrader: (2)
 
dreem1er's Avatar
 
Join Date: Dec 2006
Location: Miami
Age: 39
Posts: 5,193
Received 378 Likes on 316 Posts
^but blue and purple lights are mad jdm tight yo
Old 06-29-2012, 10:17 AM
  #11  
Intermediate
Thread Starter
 
blue02S's Avatar
 
Join Date: May 2012
Location: Fayetteville, Arkansas
Posts: 46
Received 1 Like on 1 Post
I'm actually pretty happy with the 12k. They are better than my hi beam. And the 55w ballasts are gonna wash out the color anyway. So I think for now ill stick with them but if I decide to change I have a pair of 6k.
Old 06-29-2012, 10:20 AM
  #12  
Moderator
iTrader: (1)
 
justnspace's Avatar
 
Join Date: Feb 2010
Posts: 86,295
Received 16,260 Likes on 11,971 Posts
Originally Posted by blue02S
I'm actually pretty happy with the 12k. They are better than my hi beam. And the 55w ballasts are gonna wash out the color anyway. So I think for now ill stick with them but if I decide to change I have a pair of 6k.

ewwwwwwwww
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
wusty23jd
3G TL Audio, Bluetooth, Electronics & Navigation
4
09-24-2015 11:41 AM
Iakonafuji
Car Parts for Sale
4
09-21-2015 02:39 PM
datadr
5G TLX (2015-2020)
6
09-12-2015 09:12 PM
JnC
Car Parts for Sale
3
09-11-2015 06:06 AM
voigt
3G TL (2004-2008)
12
09-02-2015 10:44 PM


Thread Tools
Search this Thread
Quick Reply: projector retro fit question



All times are GMT -5. The time now is 08:23 PM.