first mod to tsx?
#6
i too just picked up a tsx but its an 07 i saw a link somewhere but cant find it on a diy for doing interior led lighting. can someone please post a link to it. and preferably a place to get the bulbs i heard of superbrightleds.com but they are kinda expensive dunno if its real good quality that wont burn out. thanks
#7
El Cunado
Depending on the age/mileage, I would make sure everything inside/outside is good to go before modding. I bought my '05 CPO but the spark plugs were black and the engine/cabin air filters needed replacing. After checking other things, I've put Lubro Moly products through it to clean injectors/valves and used an oil treatment when I changed my oil for the first time.
After you think you're set, cold-air-intake/headers/pulleys/exhaust/suspension seem to be the first things to be replaced.
After you think you're set, cold-air-intake/headers/pulleys/exhaust/suspension seem to be the first things to be replaced.
Trending Topics
#8
L.A. > the rest
#12
10001110101
iTrader: (1)
Search Tutorial (specific examples for this thread)
Replacing existing interior bulbs with LED's
Search Advanced Search
Keyword = LED
Change dropdown to Search Titles Only
Search in forum(s): Select AcuraZine TSX Community
Leave "Also search in child forums" checked
Click Search Now
The search returns meaningful results!
-------------------------------------------------------------
Adding LED ambient lighting
Search Advanced Search
Keyword = ambient
Change dropdown to Search Titles Only
Search in forum(s): Select AcuraZine TSX Community
Leave "Also search in child forums" checked
Click Search Now
The search returns meaningful results!
-------------------------------------------------------------
Alternative method:
Google ambient lighting site:acurazine.com
http://www.google.com/search?q=ambie...Aacurazine.com
Search Advanced Search
Keyword = LED
Change dropdown to Search Titles Only
Search in forum(s): Select AcuraZine TSX Community
Leave "Also search in child forums" checked
Click Search Now
The search returns meaningful results!
-------------------------------------------------------------
Adding LED ambient lighting
Search Advanced Search
Keyword = ambient
Change dropdown to Search Titles Only
Search in forum(s): Select AcuraZine TSX Community
Leave "Also search in child forums" checked
Click Search Now
The search returns meaningful results!
-------------------------------------------------------------
Alternative method:
Google ambient lighting site:acurazine.com
http://www.google.com/search?q=ambie...Aacurazine.com
#14
El Cunado
#15
10001110101
iTrader: (1)
If you replace the stock bulbs (map lights, etc) it's a higher color temp - makes it look more clean, etc. Some are brighter than bulbs.
If you add LED's to the courtesy lighting circuit and install in the footwell area, you can see what's on the floor more easily when you get in/out of the car at night.
You can also install LED's in the footwell area and wire into the storage pocket, these will come on with the headlights and provide ambient lighting in the car.
If you add LED's to the courtesy lighting circuit and install in the footwell area, you can see what's on the floor more easily when you get in/out of the car at night.
You can also install LED's in the footwell area and wire into the storage pocket, these will come on with the headlights and provide ambient lighting in the car.
#16
Former Sponsor
iTrader: (1)
But I would do it in this order:
Cold Air Intake
Pulleys
Hondata Reflash
You should really open up the motor with the intake first before doing the reflash. It will help out well. And it would be beneficial to do the headers and high flow cat if the OP has a 04-05, which I believe he did.
#18
Depends on what are you aiming at?
1. JDM (performance oriented)
2. Elegant
3. Minimalist (daily drive)
But I would do it in this order:
Cold Air Intake
Pulleys
Hondata Reflash
You should really open up the motor with the intake first before doing the reflash. It will help out well. And it would be beneficial to do the headers and high flow cat if the OP has a 04-05, which I believe he did.
1. JDM (performance oriented)
2. Elegant
3. Minimalist (daily drive)
But I would do it in this order:
Cold Air Intake
Pulleys
Hondata Reflash
You should really open up the motor with the intake first before doing the reflash. It will help out well. And it would be beneficial to do the headers and high flow cat if the OP has a 04-05, which I believe he did.
#19
Advanced
#20
Bryan
Join Date: Jul 2010
Location: Barksdale air force base louisiana
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
For lighting go to ebay and type in year make model and interior lighting and if you want you can throw in a color too. I have a pearl white 07 TSX with black leather interior and added blue LED lights for 20 bucks pack came with all bulbs needed. Install took 5 min and it is amazing. Just love it
#21
For lighting go to ebay and type in year make model and interior lighting and if you want you can throw in a color too. I have a pearl white 07 TSX with black leather interior and added blue LED lights for 20 bucks pack came with all bulbs needed. Install took 5 min and it is amazing. Just love it
Thread
Thread Starter
Forum
Replies
Last Post
mlody
5G TLX (2015-2020)
85
12-04-2019 02:11 PM
GWEEDOspeedo
Car Parts for Sale
4
01-15-2016 10:39 PM
InFaMouSLink
Car Parts for Sale
6
10-27-2015 06:52 PM