'Official SAN ANTONIO thread'
#2562
Instructor
Hey dudes, Happy Easter everyone. Just wanted to share a pic of my daughters TL Type-S. I told her I would clean it up and fix I few things on it for her birthday. Did the headlights restore, fixed the armrest and cup holder, cleaned it inside and out, engine too, and buffed out all the scratches. Man it looks a whole lot better. Not bad for a 209K car.
#2567
Touge Chaser
Just a heads up NISMO Fiesta will be in San Marcos this weekend. Expect a lot of Z's and GTR's running around between San Antonio and Austin. This year they have Nissan Executives flying in to participate.
The following 2 users liked this post by DefMunkie:
justnspace (04-22-2014),
TL Luver (04-22-2014)
#2568
Instructor
Yep, Like he said
What surfaces or materials are OK to use WD-40 Multi-Use Product on?
WD-40 Multi-Use Product can be used on just about everything. It is safe to use on metal, rubber, wood and plastic. It can also be applied to painted metal surfaces without harming the paint. Polycarbonate and clear polystyrene plastic are among the few surfaces on which to avoid using a petroleum-based product like WD-40 Multi-Use Product.
What surfaces or materials are OK to use WD-40 Multi-Use Product on?
WD-40 Multi-Use Product can be used on just about everything. It is safe to use on metal, rubber, wood and plastic. It can also be applied to painted metal surfaces without harming the paint. Polycarbonate and clear polystyrene plastic are among the few surfaces on which to avoid using a petroleum-based product like WD-40 Multi-Use Product.
#2569
Instructor
WD-40 Uses
It also keeps your engine electric's drier, I use to use it liberally inside my jet-ski engine compartment when I had one.
What does WD-40 Multi-Use Product do?
WD-40 Multi-Use Product fulfills five basic functions:
1. LUBRICATES: The product's lubricating ingredients are widely dispersed and tenaciously held to all moving parts.
2. PENETRATES: WD-40 Multi-Use Product loosens rust-to-metal bonds and frees stuck, frozen or rusted metal parts.
3. PROTECTS: The product protects metal surfaces with corrosion-resistant ingredients to shield against moisture and other corrosive elements.
4. REMOVES: WD-40 Multi-Use Product gets under dirt, grime and grease. Use it to remove gunk from tools, equipment and vehicles. WD-40 Multi-Use Product in liquid form (e.g., gallon) also dissolves adhesives, allowing easy removal of excess bonding material.
5. DISPLACES MOISTURE: Because it displaces moisture, WD-40 Multi-Use Product quickly dries out electrical systems to eliminate moisture-induced short circuits.
What does WD-40 Multi-Use Product do?
WD-40 Multi-Use Product fulfills five basic functions:
1. LUBRICATES: The product's lubricating ingredients are widely dispersed and tenaciously held to all moving parts.
2. PENETRATES: WD-40 Multi-Use Product loosens rust-to-metal bonds and frees stuck, frozen or rusted metal parts.
3. PROTECTS: The product protects metal surfaces with corrosion-resistant ingredients to shield against moisture and other corrosive elements.
4. REMOVES: WD-40 Multi-Use Product gets under dirt, grime and grease. Use it to remove gunk from tools, equipment and vehicles. WD-40 Multi-Use Product in liquid form (e.g., gallon) also dissolves adhesives, allowing easy removal of excess bonding material.
5. DISPLACES MOISTURE: Because it displaces moisture, WD-40 Multi-Use Product quickly dries out electrical systems to eliminate moisture-induced short circuits.
The following users liked this post:
justnspace (04-23-2014)
#2572
Touge Chaser
ummmmm..... Thank you. Your not so bad yourself.....
Now if only you didn't get drunk and lost in San Antonio you could have joined us on the 3 sisters cruise and we could have actually met in real life. Until then I'm considering you a bot
Now if only you didn't get drunk and lost in San Antonio you could have joined us on the 3 sisters cruise and we could have actually met in real life. Until then I'm considering you a bot
The following users liked this post:
justnspace (04-23-2014)
#2573
Instructor
#2574
Touge Chaser
Yes I did! I was able to get Noribilt to TIG weld those suckers on. Sounds really good and very subtle!
#2575
Instructor
That's great. I'd really like to hear how they sound. Been thinking about doing something similar to mine. Which specific Magnaflows did you use and did you change the tips?
#2582
Touge Chaser
Lets have a quick dinner and coffee or drinks meet sometime in the next 2 weeks.
How about next Thursday (May 1st) at the Hoffbrau at the Rim?
Last edited by DefMunkie; 04-23-2014 at 03:53 PM.
#2583
2006 6spd
iTrader: (2)
Beez can you confirm my theory:
#2584
2006 6spd
iTrader: (2)
don't get me wrong I think margaritas are for girls; but there's just something about putting a Corona upside down in one. That has me ...
Last edited by TL Luver; 04-23-2014 at 04:43 PM.
#2585
Touge Chaser
I never been to the one at the rim but the one at the quarry has some bomb beer'aritas ...that's my hotspot to take a date too ...Corona'rita is my favorite ...
don't get me wrong I think margaritas are for girls; but there's just something about putting a Corona upside down in one. That has me ...
don't get me wrong I think margaritas are for girls; but there's just something about putting a Corona upside down in one. That has me ...
#2589
2006 6spd
iTrader: (2)
yeah I should be I only go out of town randomly....
CHAMP: hurry up and delete your message it's not too late... you never make it to the meets & get peoples hopes up!...Lol j/k...you've made a couple...
CHAMP: hurry up and delete your message it's not too late... you never make it to the meets & get peoples hopes up!...Lol j/k...you've made a couple...
#2590
Instructor
Got to fly out to Dayton on Mon. Get back Friday the 2nd.
The following users liked this post:
justnspace (04-24-2014)
#2597
Touge Chaser
#2598
Chapter Leader (San Antonio)
iTrader: (3)
I'm thinking of a camping ground spot on Lake Travis. It is going to be hot in June, so why not BBQ, camping, fishing, and the lake? I'm trying to figure out the best camping spot on Travis. I've only been too Sandy Creek.
The following 2 users liked this post by TheChamp531:
justnspace (04-24-2014),
TL Luver (04-24-2014)
#2600
2006 6spd
iTrader: (2)
We're still deciding on locations, but the meet would be during the National AZ meet, so, the 6th, 7th, and 8th of June.
I'm thinking of a camping ground spot on Lake Travis. It is going to be hot in June, so why not BBQ, camping, fishing, and the lake? I'm trying to figure out the best camping spot on Travis. I've only been too Sandy Creek.
I'm thinking of a camping ground spot on Lake Travis. It is going to be hot in June, so why not BBQ, camping, fishing, and the lake? I'm trying to figure out the best camping spot on Travis. I've only been too Sandy Creek.