A/C leaking from high and low pressure ports...
#1
Advanced
Thread Starter
A/C leaking from high and low pressure ports...
Guys,
My AC stopped working recently. Someone told me to put some spit (I know, lol) or soapy water on top of the low pressure ports to see if the leak is coming out of there.
Sure enough... both are leaking.
I know someone that owns a tool to replace the part. Has anyone had this happen?
Also, am I gonna have to put oil back in the system after the freon is completely gone while replacing the part?
Thanks.
My AC stopped working recently. Someone told me to put some spit (I know, lol) or soapy water on top of the low pressure ports to see if the leak is coming out of there.
Sure enough... both are leaking.
I know someone that owns a tool to replace the part. Has anyone had this happen?
Also, am I gonna have to put oil back in the system after the freon is completely gone while replacing the part?
Thanks.
#2
iWhine S/C 6MT TL
iTrader: (1)
Unfortunately, there are no valve cores that Acura sells to replace leaking cores. You could use a tire valve core removal tool to see if the cores inside the fittings are tight. If they are tight and still leak you must replace the lines affected.
The following users liked this post:
Killabee44 (08-09-2011)
#3
Advanced
Thread Starter
Thanks for your reply...
Damn. No cores. Good info though. I didn't know that. I thought I could just buy them.
Hopefully they're just loose.
Ill post back w updates..
Damn. No cores. Good info though. I didn't know that. I thought I could just buy them.
Hopefully they're just loose.
Ill post back w updates..
Thread
Thread Starter
Forum
Replies
Last Post
k6biv
Member Cars for Sale
1
09-10-2015 06:37 PM
HeloDown
3G TL Problems & Fixes
4
09-08-2015 06:51 PM