Serpentine belt diagram
#1
8th Gear
Thread Starter
Join Date: Nov 2013
Location: Altoona, PA
Age: 46
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Serpentine belt diagram
Does anyone have a serpentine belt diagram? There's not one under my hood, or in the manual, and I did not take note to its position upon removal. Thanks!
#2
8th Gear
Thread Starter
Join Date: Nov 2013
Location: Altoona, PA
Age: 46
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
I found a generic picture of one through Google images & managed to figure it out. Take note to its routing before you remove one. It'll save ya the hassle down the road!
#4
Check the pics in the following link. I will note that I was unable, even with the *special-belt-tool* I purchased, to route the belt without access below, around the lower pulleys. I remove the belt OK, just could not get it back on, until ...
I removed the splash shield, located between the front bumper cover, and the front frame cross member (large round tube). That will allow access behind the passenger side wheel, because the splash shield also covers part of the area of the belt and pulleys.
https://acurazine.com/forums/showthread.php?p=14629541#post14629541
I removed the splash shield, located between the front bumper cover, and the front frame cross member (large round tube). That will allow access behind the passenger side wheel, because the splash shield also covers part of the area of the belt and pulleys.
https://acurazine.com/forums/showthread.php?p=14629541#post14629541
Thread
Thread Starter
Forum
Replies
Last Post
rp_guy
Member Cars for Sale
9
07-16-2017 07:33 AM