Metallic/grinding noises
#1
Metallic/grinding noises
Hi
I have a 2000 acura tl with 192K miles on it. The transmission has about 100K miles on it. Of late i have been hearing metallic grinding kind of noises from the front of the car seemingly from the under-side.
The noise is present when i start the engine and thru 1/2nd gear. It goes way as i speed up. the noise stays even when the transmission shift lever is in 'P'.
I do suspect the grinding noises to be the transmission. I got it checked by a mechanic who said the transmission is ok but it is actually a noise from "loose substrate" in the catalytic converter. The cat did throw the P0420 code. However currently the check engine light is off, for the past few days.
How can i know for sure the noise is loose substrate from the cat and NOT the transmission?
Thanks.
I have a 2000 acura tl with 192K miles on it. The transmission has about 100K miles on it. Of late i have been hearing metallic grinding kind of noises from the front of the car seemingly from the under-side.
The noise is present when i start the engine and thru 1/2nd gear. It goes way as i speed up. the noise stays even when the transmission shift lever is in 'P'.
I do suspect the grinding noises to be the transmission. I got it checked by a mechanic who said the transmission is ok but it is actually a noise from "loose substrate" in the catalytic converter. The cat did throw the P0420 code. However currently the check engine light is off, for the past few days.
How can i know for sure the noise is loose substrate from the cat and NOT the transmission?
Thanks.
#2
jack the left side of the car up and support
bang on the bottem of the cat with your hand or a soft mallet
if it makes loose rock noises.. its bad
A muffler shop will usually test it for free- with the same banging plus a pressure/flow rate and temp test if needed
ck our vendor Excelerate for excellent deal on replacement units
bang on the bottem of the cat with your hand or a soft mallet
if it makes loose rock noises.. its bad
A muffler shop will usually test it for free- with the same banging plus a pressure/flow rate and temp test if needed
ck our vendor Excelerate for excellent deal on replacement units
Thread
Thread Starter
Forum
Replies
Last Post
MrHeeltoe
1G TSX Tires, Wheels, & Suspension
20
02-23-2023 01:54 PM
MrHeeltoe
2G TSX Tires, Wheels & Suspension
3
09-29-2015 10:43 PM
MrHeeltoe
3G TL Tires, Wheels & Suspension
0
09-28-2015 05:43 PM