Navigation hack for orange disk 3.a0 (all files here)
11-11-2011, 06:54 PM
#1
Navigation hack for orange disk 3.a0 (all files here)
Hi everyone,
So my relationship with Acurazine has been completely one sided, as in I take take take, and never give! So with that said I thought I'd put this up here to help everybody out who's had some struggles with this.
http://www.megaupload.com/?d=6W2J0YG0
The link above points to a zip file that includes the following files:
BN2HH12C.BIN
BNHH401A.BIN
BN2HHMLD.BIN
dumpnavi.exe
I included both BN2HH12C.BIN and BNHH401A.BIN...depending on your Nav you'll have to upload your image to one of those files when uploading using dumpnavi.
To find out which file your car is running do the following:
1. Turn your car's ignition to ACC
2. When the nav loads completely press and hold "GUIDE" "MENU" and "CANCEL" for approx 5 seconds to bring up the diagnostic menu.
3. Wait another 5 seconds to let it load up completely. Press "version" button on the screen.
4. Hold down the "MENU" button until you get a new window displaying what .bin you are running. Write this down so you dont forget.
Next...
Get back to your computer and open up "dumpnavi".
1. For your Bootable File, select the .bin that applies to your car (mine was NHH401A.BIN).
2. Make sure "Modify Bitmap" is checked and upload your custom background.
3. Make sure to uncheck "Modify Nag Screen". These files already include the nag screen and ok button bypass hacks.
4. Click "Modify"
You should all be set now.
Burn your files on to a CD/DVD. I used a DVD-R. I have no idea if you can use a CDR or DVD+R. I think some have used CDR's
This is important! you have to make an ISO disk. I think a lot of people run into issues because they don't do this.
Your ISO disk only needs the file you modified (in my case BNHH401A.BIN) and BN2HHMLD.BIN
Once you're done all this get back to your car and do the following (taken from the Navigation Hack Guide):
1. Turn your car's ignition to ACC
2. Open the trunk and pop out the NAVI disk (if it's in there)
3. Insert your newly burned CD.
4. Go back to the driver seat, the display will show some dvd read error, now press and hold "GUIDE" "MENU" and "CANCEL" for approx 5 seconds to bring up the diagnostic menu.
5. Wait another 5 seconds to let it load up completely. Press "version" button on the screen
6. Press "LOAD DISC" to load your custom bin into the navigation.
7. Wait until it's completely done and it will then display another error message about can't read the navi dvd, now take out your bin CD and insert your Navigation disc and you are done!
If you follow exactly what I wrote above this NEEDS to work. It's exactly what I did and it worked perfectly.
You'll have your custom background, trip computer, ok bypass and no nag screen.
I decided to make a post for this because things seem to be buried in the main navigation hacking guide. Thought this would be helpful.
So my relationship with Acurazine has been completely one sided, as in I take take take, and never give! So with that said I thought I'd put this up here to help everybody out who's had some struggles with this.
http://www.megaupload.com/?d=6W2J0YG0
The link above points to a zip file that includes the following files:
BN2HH12C.BIN
BNHH401A.BIN
BN2HHMLD.BIN
dumpnavi.exe
I included both BN2HH12C.BIN and BNHH401A.BIN...depending on your Nav you'll have to upload your image to one of those files when uploading using dumpnavi.
To find out which file your car is running do the following:
1. Turn your car's ignition to ACC
2. When the nav loads completely press and hold "GUIDE" "MENU" and "CANCEL" for approx 5 seconds to bring up the diagnostic menu.
3. Wait another 5 seconds to let it load up completely. Press "version" button on the screen.
4. Hold down the "MENU" button until you get a new window displaying what .bin you are running. Write this down so you dont forget.
Next...
Get back to your computer and open up "dumpnavi".
1. For your Bootable File, select the .bin that applies to your car (mine was NHH401A.BIN).
2. Make sure "Modify Bitmap" is checked and upload your custom background.
3. Make sure to uncheck "Modify Nag Screen". These files already include the nag screen and ok button bypass hacks.
4. Click "Modify"
You should all be set now.
Burn your files on to a CD/DVD. I used a DVD-R. I have no idea if you can use a CDR or DVD+R. I think some have used CDR's
This is important! you have to make an ISO disk. I think a lot of people run into issues because they don't do this.
Your ISO disk only needs the file you modified (in my case BNHH401A.BIN) and BN2HHMLD.BIN
Once you're done all this get back to your car and do the following (taken from the Navigation Hack Guide):
1. Turn your car's ignition to ACC
2. Open the trunk and pop out the NAVI disk (if it's in there)
3. Insert your newly burned CD.
4. Go back to the driver seat, the display will show some dvd read error, now press and hold "GUIDE" "MENU" and "CANCEL" for approx 5 seconds to bring up the diagnostic menu.
5. Wait another 5 seconds to let it load up completely. Press "version" button on the screen
6. Press "LOAD DISC" to load your custom bin into the navigation.
7. Wait until it's completely done and it will then display another error message about can't read the navi dvd, now take out your bin CD and insert your Navigation disc and you are done!
If you follow exactly what I wrote above this NEEDS to work. It's exactly what I did and it worked perfectly.
You'll have your custom background, trip computer, ok bypass and no nag screen.
I decided to make a post for this because things seem to be buried in the main navigation hacking guide. Thought this would be helpful.
The following 7 users liked this post by djspot:
alexgolden (11-18-2011),
aspectl253 (11-16-2011),
fbatzaz (03-21-2013),
Shoeface (03-22-2012),
TheHypnoToad (03-22-2012),
and 2 others liked this post.
11-12-2011, 11:54 AM
#5
You don't really need any programs to download. The only thing you would need to download I included in the zip file. That would be the dumpnavi program.
Other than that, you'll need burning software thats capable of creating iso disks, and possibly photoshop or something else in which you can create your background image. You do have some options for this, a bunch of members on here have uploaded backgrounds.
Other than that, you'll need burning software thats capable of creating iso disks, and possibly photoshop or something else in which you can create your background image. You do have some options for this, a bunch of members on here have uploaded backgrounds.
11-13-2011, 09:59 AM
#6
2005TL(6MT)
Are the bin files from version 3.A0? If not please tell us what version they are from. I don't believe the 3.A0 or 3.B0 versions have been hacked yet and the last hacked orange version is 3.80 as far as I know.
I would like to have the correct Daylight Savings Time dates which were lost when I used hacked 3.80 files for the modification. Apparently the new dates were put into effect sometime after version 3.80. This was the secondary reason I upgraded to 3.A0 from 3.40C. The primary was of course were the maps.
I would sure like to have a navi that always has the correct time and keep my custom background, trip computer, ok bypass and the no nag screen.
And thanks for helping others out!
I would like to have the correct Daylight Savings Time dates which were lost when I used hacked 3.80 files for the modification. Apparently the new dates were put into effect sometime after version 3.80. This was the secondary reason I upgraded to 3.A0 from 3.40C. The primary was of course were the maps.
I would sure like to have a navi that always has the correct time and keep my custom background, trip computer, ok bypass and the no nag screen.
And thanks for helping others out!
Last edited by clsdave; 11-13-2011 at 10:03 AM.
11-13-2011, 10:21 AM
#7
Are the bin files from version 3.A0? If not please tell us what version they are from. I don't believe the 3.A0 or 3.B0 versions have been hacked yet and the last hacked orange version is 3.80 as far as I know.
I would like to have the correct Daylight Savings Time dates which were lost when I used hacked 3.80 files for the modification. Apparently the new dates were put into effect sometime after version 3.80. This was the secondary reason I upgraded to 3.A0 from 3.40C. The primary was of course were the maps.
I would sure like to have a navi that always has the correct time and keep my custom background, trip computer, ok bypass and the no nag screen.
And thanks for helping others out!
I would like to have the correct Daylight Savings Time dates which were lost when I used hacked 3.80 files for the modification. Apparently the new dates were put into effect sometime after version 3.80. This was the secondary reason I upgraded to 3.A0 from 3.40C. The primary was of course were the maps.
I would sure like to have a navi that always has the correct time and keep my custom background, trip computer, ok bypass and the no nag screen.
And thanks for helping others out!
Trending Topics
11-13-2011, 04:39 PM
#9
They're not from my 3.a0 disk. My time and date are correct.
I'm going to give the 3.a0 files a try when I get the chance. I just wanted something quick I knew would work.
If you're only worry is the time, if its effected by this being the 3.8 files, changing it manually isn't a big thing, I don't think.
Also, just tested the link. it is working for me
I'm going to give the 3.a0 files a try when I get the chance. I just wanted something quick I knew would work.
If you're only worry is the time, if its effected by this being the 3.8 files, changing it manually isn't a big thing, I don't think.
Also, just tested the link. it is working for me
Last edited by Steven Bell; 11-14-2011 at 10:19 PM. Reason: Merged Posts.
11-13-2011, 08:36 PM
#10
Racer
iTrader: (1)
djspot - just want to clarify one point:
3. Make sure to uncheck "Modify Nag Screen". These files already include the nag screen and ok button bypass hacks.
So you've already made the nag screen and ok button changes to the files* in the zipped folder?
* Files:
BN2HH12C.BIN
BNHH401A.BIN
BN2HHMLD.BIN
3. Make sure to uncheck "Modify Nag Screen". These files already include the nag screen and ok button bypass hacks.
So you've already made the nag screen and ok button changes to the files* in the zipped folder?
* Files:
BN2HH12C.BIN
BNHH401A.BIN
BN2HHMLD.BIN
11-13-2011, 08:41 PM
#11
djspot - just want to clarify one point:
3. Make sure to uncheck "Modify Nag Screen". These files already include the nag screen and ok button bypass hacks.
So you've already made the nag screen and ok button changes to the files* in the zipped folder?
* Files:
BN2HH12C.BIN
BNHH401A.BIN
BN2HHMLD.BIN
3. Make sure to uncheck "Modify Nag Screen". These files already include the nag screen and ok button bypass hacks.
So you've already made the nag screen and ok button changes to the files* in the zipped folder?
* Files:
BN2HH12C.BIN
BNHH401A.BIN
BN2HHMLD.BIN
The following users liked this post:
triax37 (11-13-2011)
11-14-2011, 02:53 PM
#13
Racer
iTrader: (1)
11-15-2011, 10:04 AM
#14
Hi everyone,
You should all be set now.
Burn your files on to a CD/DVD. I used a DVD-R. I have no idea if you can use a CDR or DVD+R. I think some have used CDR's
This is important! you have to make an ISO disk. I think a lot of people run into issues because they don't do this.
Your ISO disk only needs the file you modified (in my case BNHH401A.BIN) and BN2HHMLD.BIN
Once you're done all this get back to your car and do the following (taken from the Navigation Hack Guide):
1. Turn your car's ignition to ACC
2. Open the trunk and pop out the NAVI disk (if it's in there)
3. Insert your newly burned CD.
4. Go back to the driver seat, the display will show some dvd read error, now press and hold "GUIDE" "MENU" and "CANCEL" for approx 5 seconds to bring up the diagnostic menu.
5. Wait another 5 seconds to let it load up completely. Press "version" button on the screen
6. Press "LOAD DISC" to load your custom bin into the navigation.
7. Wait until it's completely done and it will then display another error message about can't read the navi dvd, now take out your bin CD and insert your Navigation disc and you are done!
If you follow exactly what I wrote above this NEEDS to work. It's exactly what I did and it worked perfectly.
You'll have your custom background, trip computer, ok bypass and no nag screen.
I decided to make a post for this because things seem to be buried in the main navigation hacking guide. Thought this would be helpful.
You should all be set now.
Burn your files on to a CD/DVD. I used a DVD-R. I have no idea if you can use a CDR or DVD+R. I think some have used CDR's
This is important! you have to make an ISO disk. I think a lot of people run into issues because they don't do this.
Your ISO disk only needs the file you modified (in my case BNHH401A.BIN) and BN2HHMLD.BIN
Once you're done all this get back to your car and do the following (taken from the Navigation Hack Guide):
1. Turn your car's ignition to ACC
2. Open the trunk and pop out the NAVI disk (if it's in there)
3. Insert your newly burned CD.
4. Go back to the driver seat, the display will show some dvd read error, now press and hold "GUIDE" "MENU" and "CANCEL" for approx 5 seconds to bring up the diagnostic menu.
5. Wait another 5 seconds to let it load up completely. Press "version" button on the screen
6. Press "LOAD DISC" to load your custom bin into the navigation.
7. Wait until it's completely done and it will then display another error message about can't read the navi dvd, now take out your bin CD and insert your Navigation disc and you are done!
If you follow exactly what I wrote above this NEEDS to work. It's exactly what I did and it worked perfectly.
You'll have your custom background, trip computer, ok bypass and no nag screen.
I decided to make a post for this because things seem to be buried in the main navigation hacking guide. Thought this would be helpful.
Thanks
11-15-2011, 10:48 AM
#15
I used Nero to burn my ISO disc.
For a long time I used IMGburn to create ISO disks http://www.imgburn.com/
Should work fine, and its free.
For a long time I used IMGburn to create ISO disks http://www.imgburn.com/
Should work fine, and its free.
11-16-2011, 10:29 AM
#19
Hi guys,
just looking into my Megaupload account...it showing it being unavailable for me as well. Stupid megaupload...if I can't get it going, I'll uploaded to another file sharing service. I'm thinking the downloads may be capped. It's at 68 downloads.
just looking into my Megaupload account...it showing it being unavailable for me as well. Stupid megaupload...if I can't get it going, I'll uploaded to another file sharing service. I'm thinking the downloads may be capped. It's at 68 downloads.
11-16-2011, 10:35 AM
#20
Looks like its up and running again.
I sent them an email asking why this is happening...I'll get back to you guys with an answer.
So seeing as this has had 68 downloads I wonder if its working for anybody. Haven't got any feedback on it working or not, so if you've downloaded and applied the hack let us know if it worked for you.
Thanks!
I sent them an email asking why this is happening...I'll get back to you guys with an answer.
So seeing as this has had 68 downloads I wonder if its working for anybody. Haven't got any feedback on it working or not, so if you've downloaded and applied the hack let us know if it worked for you.
Thanks!
The following users liked this post:
aspectl253 (11-16-2011)
11-17-2011, 09:56 AM
#24
A few things...
Megaupload support got back to me....they let me know if we get that temporary file is unavailable message, it means the server that the file is on may be down and usually gets resolved shortly after, within an hour or so. So if you get that message just check back later....
Also...as far as using imgburn...I think I messed up, I think that software only burns iso files.
so I found this
http://www.afterdawn.com/guides/arch..._with_nero.cfm
It would have you downloading a trial version of Nero ROM or the Nero suite. From their you'd follow the instruction for burning an image.
Nero or any other burning software seems to be bundled with every computer.
Oh and Hammer...the hack allows you to throw up your own customized splash screen for the nav. Also, it eliminates having to press the ok button and doesn't give you the navigation use disclaimer....AAANNNDDD you get a fancy little Trip Computer.
Megaupload support got back to me....they let me know if we get that temporary file is unavailable message, it means the server that the file is on may be down and usually gets resolved shortly after, within an hour or so. So if you get that message just check back later....
Also...as far as using imgburn...I think I messed up, I think that software only burns iso files.
so I found this
http://www.afterdawn.com/guides/arch..._with_nero.cfm
It would have you downloading a trial version of Nero ROM or the Nero suite. From their you'd follow the instruction for burning an image.
Nero or any other burning software seems to be bundled with every computer.
Oh and Hammer...the hack allows you to throw up your own customized splash screen for the nav. Also, it eliminates having to press the ok button and doesn't give you the navigation use disclaimer....AAANNNDDD you get a fancy little Trip Computer.
11-18-2011, 05:05 PM
#26
Thanks djspot! I know others have put a lot of hard work into this but this made it easy to do. I used imgburn and it worked just fine! I added this to my wife's '06 TL as the start up image:
Attachment 117327
Attachment 117327
03-21-2012, 08:33 PM
#27
updated link since "The Man" got to Megaupload
https://rapidshare.com/files/1331935...vi-gui-new.zip
Unfortunately, I can not for the life of me find the original zip file that BN2HH12C.BIN file. However, if your nav uses this and not the bin ending in 401A, you can simply copy this bin file from you nav disk.
https://rapidshare.com/files/1331935...vi-gui-new.zip
Unfortunately, I can not for the life of me find the original zip file that BN2HH12C.BIN file. However, if your nav uses this and not the bin ending in 401A, you can simply copy this bin file from you nav disk.
Last edited by djspot; 03-21-2012 at 08:44 PM.
04-25-2012, 09:50 AM
#32
Advanced
04-25-2012, 02:17 PM
#33
Cesspool of Knowledge
OK ... My Navi runs the orange 3.80 disk, and my boot file is BN2HH12C.BIN - Which is the file that djspot unfortunately lost.
So, if I copy the BN2HH12C.BIN file from my stock DVD, should I enable the "Modify Nag Screen" checkbox, since my version of BN2HH12C.BIN is not hacked yet?
Thanks,
So, if I copy the BN2HH12C.BIN file from my stock DVD, should I enable the "Modify Nag Screen" checkbox, since my version of BN2HH12C.BIN is not hacked yet?
Thanks,
04-25-2012, 02:37 PM
#34
Cesspool of Knowledge
Well, I couldn't seem to get this to work on my BN2HH12C.BIN file.
When I enabled the "Modify Nag Screen", I got a "Nag modification is not supported on your car" message.
When I tried to modify the bitmap, I saw an "Invalid .XIP" file.
When I enabled the "Modify Nag Screen", I got a "Nag modification is not supported on your car" message.
When I tried to modify the bitmap, I saw an "Invalid .XIP" file.
04-25-2012, 11:34 PM
#35
Cesspool of Knowledge
For those of you with a Version 3.80 (Orange Disk) Navi and bootloading BN2HH12C.BIN file (required!), I have a solution for you here: https://acurazine.com/forums/showpos...postcount=1634
Cheers!
Cheers!
11-18-2012, 01:47 PM
#38
