Automatic window feature not working

Old 12-31-2009, 05:10 PM
  #1  
Cruisin'
Thread Starter
 
ljluck's Avatar
 
Join Date: Feb 2009
Location: Cedar Park, TX
Age: 48
Posts: 17
Received 1 Like on 1 Post
Automatic window feature not working

I just got my 05 TL from the shop because I had to have some scratches repaired on the drivers side door. I noticed now that the automatic window feature does not work. The power windows do, but the feature when you press the button once to open or close the window automatically does not, but does on the passenger side. Anyone know what could be the problem? Why would that now work? Is the a connector that came unconnected? I never realized how much I liked this feature until now that I don't have it.

Popular Reply

12-31-2009, 05:22 PM
princelybug
LIST/RAMEN/WING MAHSTA 짱
iTrader: (16)
 
princelybug's Avatar
 
Join Date: Aug 2007
Location: Orange, CA
Posts: 22,454
Received 207 Likes on 158 Posts
Hmm...

When I had my Audi, this happened to me. I don't know if it'll work on the TL, but try this:

Keep your finger depressed fully on the window switch the whole time you roll down the window. After it is fully down, keep your finger on the switch fully depressed for 2 seconds.

Then, do the opposite when you roll the window up. Keep the switch fully lifted up while the window rolls up, and for an extra 2 seconds after it is fully closed.

Now, try the auto up/down feature and see if it works.

It's worth a try.
Old 12-31-2009, 05:22 PM
  #2  
LIST/RAMEN/WING MAHSTA 짱
iTrader: (16)
 
princelybug's Avatar
 
Join Date: Aug 2007
Location: Orange, CA
Posts: 22,454
Received 207 Likes on 158 Posts
Hmm...

When I had my Audi, this happened to me. I don't know if it'll work on the TL, but try this:

Keep your finger depressed fully on the window switch the whole time you roll down the window. After it is fully down, keep your finger on the switch fully depressed for 2 seconds.

Then, do the opposite when you roll the window up. Keep the switch fully lifted up while the window rolls up, and for an extra 2 seconds after it is fully closed.

Now, try the auto up/down feature and see if it works.

It's worth a try.
The following 12 users liked this post by princelybug:
08TLTypeS (07-15-2017), ABP_04TL (02-23-2012), freakonomics101 (05-10-2017), JDiMage (03-09-2012), jisleyjr (03-01-2012), Kaiii (09-25-2019), ljluck (05-25-2012), pchiariello (12-28-2015), Pchronicity (02-27-2020), SurfingScotty (09-20-2011), tatonvn (12-04-2012), TCM TL 05 (08-25-2017) and 7 others liked this post. (Show less...)
Old 12-31-2009, 05:34 PM
  #3  
Cruisin'
Thread Starter
 
ljluck's Avatar
 
Join Date: Feb 2009
Location: Cedar Park, TX
Age: 48
Posts: 17
Received 1 Like on 1 Post
worth a try it was - thanks Princelybug that did the trick!! that was easy, thank goodness it wasn't the regulator! You're awesome!
The following users liked this post:
Barry Phipps (02-22-2021)
Old 12-31-2009, 05:40 PM
  #4  
LIST/RAMEN/WING MAHSTA 짱
iTrader: (16)
 
princelybug's Avatar
 
Join Date: Aug 2007
Location: Orange, CA
Posts: 22,454
Received 207 Likes on 158 Posts
No problem! I'm glad it worked!
The following users liked this post:
Boardwalk (06-21-2011)
Old 01-01-2010, 07:29 PM
  #5  
Former Sponsor
iTrader: (18)
 
AckTL05's Avatar
 
Join Date: Jun 2009
Location: NJ
Posts: 2,787
Received 306 Likes on 193 Posts
technology is very..very..interesting
The following users liked this post:
Undying Dreams (11-09-2012)
Old 06-18-2010, 02:32 PM
  #6  
Cruisin'
 
Xiteg's Avatar
 
Join Date: Jan 2008
Location: Ft. Lauderdale, FL
Age: 45
Posts: 17
Likes: 0
Received 0 Likes on 0 Posts
wow that worked!! but... now the driver side will only go half way up and stop??!! then i have to roll it the rest of the way up manually.

any thoughts?
Old 06-18-2010, 06:21 PM
  #7  
Former Sponsor
 
acurapartssource's Avatar
 
Join Date: May 2010
Location: Tempe AZ
Posts: 39
Likes: 0
Received 1 Like on 1 Post
Power window Control Unit Reset (without HDS)1Turn the ignition switch ON (II).2Move the driver's (passenger's) window all the way down by using the driver's (passenger's) window DOWN switch.3Open the driver's (passenger's) door.NOTE: step 4-7 must be done within 5 seconds of each other.4Turn the ignition switch OFF.5Push and hold the driver's (passenger's) window DOWN switch.6Turn the ignition switch ON (II).7Release the driver's (passenger's) window DOWN switch.8Repeat step 4-7 three more times.9Wait 1 second.10Confirm that AUTO UP and AUTO DOWN do not work. If AUTO UP and DOWN work, go back to step 1.11Move the driver's (passenger's) window all the way down by using the driver's (passenger's) window DOWN switch.12Pull up and hold the driver's (passenger's) window UP switch until the window reaches the fully closed position, then continue to hold the switch for 1 second.13Confirm that the power window control unit is reset by using the driver's (passenger's) window AUTO UP and AUTO DOWN function.If the window still does not work in AUTO, repeat the procedure several times, paying close attention to the 5 second time limit between steps. If it still does not work, go to B-CAN System Diagnosis Test Mode A.Personally I'd take it back to the Dealer, But if your Handy i Hope this Helps
The following users liked this post:
takamme (01-31-2016)
Old 10-25-2010, 10:54 PM
  #8  
Racer
 
TL-Rocket's Avatar
 
Join Date: Nov 2003
Location: Greenfield, MA
Posts: 305
Received 10 Likes on 7 Posts
Talking

Originally Posted by princelybug
Hmm...

When I had my Audi, this happened to me. I don't know if it'll work on the TL, but try this:

Keep your finger depressed fully on the window switch the whole time you roll down the window. After it is fully down, keep your finger on the switch fully depressed for 2 seconds.

Then, do the opposite when you roll the window up. Keep the switch fully lifted up while the window rolls up, and for an extra 2 seconds after it is fully closed.

Now, try the auto up/down feature and see if it works.

It's worth a try.
I just tried this and it works!!

Thanks,
TL-Rocket
Old 12-02-2010, 04:47 PM
  #9  
3rd Gear
 
Burt the Boater's Avatar
 
Join Date: Sep 2007
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Thank you Princely Bug and TL Rocket, I too just tried this after I replaced my second Acura battery in three years. The auto up/down feature stopped working after I replaced the battery, but your two second hold procedure worked!

Cheers,

Burt
Old 05-07-2011, 11:40 PM
  #10  
Racer
 
gogators22's Avatar
 
Join Date: Apr 2011
Age: 43
Posts: 349
Received 6 Likes on 5 Posts
Originally Posted by princelybug
Hmm...

When I had my Audi, this happened to me. I don't know if it'll work on the TL, but try this:

Keep your finger depressed fully on the window switch the whole time you roll down the window. After it is fully down, keep your finger on the switch fully depressed for 2 seconds.

Then, do the opposite when you roll the window up. Keep the switch fully lifted up while the window rolls up, and for an extra 2 seconds after it is fully closed.

Now, try the auto up/down feature and see if it works.

It's worth a try.
you mean fully depressed without pushing hard enough to trigger the auto, right?
Old 05-09-2011, 06:31 PM
  #11  
Racer
 
gogators22's Avatar
 
Join Date: Apr 2011
Age: 43
Posts: 349
Received 6 Likes on 5 Posts
since this thread is being bumped as the "reset" thread, I just wanted to let other members know this DOESN'T WORK.

It's the regulator from what I've read.
Old 05-23-2011, 02:43 PM
  #12  
Big plans not enough $$$
 
NIGHTEHAWK's Avatar
 
Join Date: May 2011
Location: Pasco,WA
Age: 34
Posts: 581
Received 39 Likes on 36 Posts
It worked for me, thanks!
Old 06-21-2011, 10:01 PM
  #13  
3rd Gear
 
Boardwalk's Avatar
 
Join Date: Jun 2011
Age: 42
Posts: 3
Received 0 Likes on 0 Posts
I replaced my battery today and I was wondering why my auto window on the driver side wasn't working. but good info, thanks princelybug and acurapartssource that easy fix worked.
Old 06-22-2011, 12:36 PM
  #14  
Advanced
 
wise_optimist's Avatar
 
Join Date: Jul 2010
Location: Maryland
Age: 42
Posts: 62
Received 4 Likes on 4 Posts
Originally Posted by gogators22
since this thread is being bumped as the "reset" thread, I just wanted to let other members know this DOESN'T WORK.

It's the regulator from what I've read.
Sometimes it can be "reset" using method described above (I've done this before and worked for me). However, if the regulator is malfunctioning, above method doesn't help (Figuring out how much it would cost me since my regulators are shot on both sides).
Old 03-09-2012, 12:54 PM
  #15  
Instructor
 
JDiMage's Avatar
 
Join Date: Sep 2011
Location: North Little Rock, AR
Age: 40
Posts: 188
Received 24 Likes on 23 Posts
Just worked for me, I know this is old but thanks anyways!
Old 04-10-2012, 12:01 PM
  #16  
Advanced
iTrader: (1)
 
Splke's Avatar
 
Join Date: Apr 2010
Location: Bronx, NY
Age: 44
Posts: 78
Received 13 Likes on 11 Posts
^^^ yeah dude, this just worked for me too. This one is worth bringing back from the dead.
Old 04-11-2012, 05:40 PM
  #17  
6th Gear
 
MrNachoCheese's Avatar
 
Join Date: Mar 2011
Age: 40
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
This worked on my '03 CL as well.
Old 04-20-2012, 06:50 PM
  #18  
Racer
 
Toppatop's Avatar
 
Join Date: Mar 2012
Location: Connecticut
Posts: 294
Received 21 Likes on 19 Posts
Great advise. Just worked on my 08 Acura RL. Thanks
Old 04-22-2012, 10:55 PM
  #19  
Cruisin'
 
MyFreakGSR's Avatar
 
Join Date: Apr 2012
Age: 39
Posts: 18
Likes: 0
Received 7 Likes on 4 Posts
Originally Posted by gogators22
since this thread is being bumped as the "reset" thread, I just wanted to let other members know this DOESN'T WORK.

It's the regulator from what I've read.
Well, your partially correct.

When the window auto feature does not work at all. You can do the window reset procedure where you hold it for 2 seconds.

BUT, if you have a window that goes up part way then stops and goes back down...that is when you need a regulator. (sometimes it can be reset and it will work again for a little while.) There is a service bulletin for 04-08 TL's for this very problem.
The following users liked this post:
MBLiberty (07-02-2019)
Old 04-23-2012, 11:24 PM
  #20  
Safety Car
iTrader: (7)
 
vietxquangstah's Avatar
 
Join Date: Jan 2011
Location: DALLAS TX
Posts: 3,806
Received 765 Likes on 550 Posts
My car is salvage title. Will dealers still perform TSB recall work for free or no? I noticed my front passenger glass has scratches on the outside of the glass from going up and down. Sometimes it will automatically stop and roll back down partially when I press auto up for it. I have to manually roll it up by not pressing it to the 2nd click and hold it until it closes properly
Old 11-09-2012, 12:05 PM
  #21  
Instructor
 
scrim67's Avatar
 
Join Date: May 2012
Age: 57
Posts: 102
Received 3 Likes on 2 Posts
Yesterday I inadvertantly left my ignition switch in the II position while I was on a long phone call in my RL. Well not surprisingly I drained the battery.

While waiting for AAA my vehicle did start up without a jump but I noticed two things:

My nav/radio was asking me for a PIN number
My windows were acting very strangely


Well I saved myself a trip to the dealer by using this website and fixed both problems on my own.

The windows situation I may never have figured out on my own as I did not see any mention of a WINDOWS RESET anywhere in the manual.

Thanks all!!!

mike
Old 03-07-2014, 05:51 PM
  #22  
3rd Gear
 
Anonymous95's Avatar
 
Join Date: Feb 2014
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
AHH saved my life...was freaking out for a second. Love this forum!
Old 07-07-2014, 08:15 PM
  #23  
04TL4L
 
dommafia's Avatar
 
Join Date: Sep 2009
Location: ptwizzle, nj
Age: 42
Posts: 106
Likes: 0
Received 2 Likes on 2 Posts
Originally Posted by princelybug
Hmm...

When I had my Audi, this happened to me. I don't know if it'll work on the TL, but try this:

Keep your finger depressed fully on the window switch the whole time you roll down the window. After it is fully down, keep your finger on the switch fully depressed for 2 seconds.

Then, do the opposite when you roll the window up. Keep the switch fully lifted up while the window rolls up, and for an extra 2 seconds after it is fully closed.

Now, try the auto up/down feature and see if it works.

It's worth a try.
Old thread but you just saved me a trip to the dealer, worked!!!
Old 09-13-2015, 11:37 AM
  #24  
Advanced
 
Cheezes's Avatar
 
Join Date: May 2009
Location: Ft. Lauderdale
Age: 48
Posts: 52
Likes: 0
Received 2 Likes on 2 Posts
This just happened to me and the reset method mentioned by princelybug worked! This is why this is the best Acura forum online bar none! Thanks guys!
The following users liked this post:
fmallabykay (01-02-2021)
Old 05-10-2017, 07:17 PM
  #25  
3rd Gear
 
freakonomics101's Avatar
 
Join Date: May 2017
Age: 30
Posts: 3
Received 0 Likes on 0 Posts
Such a simple fix!! Although I didn't swap out my batter, it just stopped working randomly... driver window only... weird but I'm glad I saw this fix... thanks #princelybug!
Old 07-15-2017, 06:25 PM
  #26  
4th Gear
 
08TLTypeS's Avatar
 
Join Date: Aug 2011
Age: 37
Posts: 4
Received 0 Likes on 0 Posts
Mine stopped working randomly (got a new battery about a month ago) and this fixed it. Thanks! I thought I was going to have to replace the window regulator!
Old 08-25-2019, 11:27 AM
  #27  
1st Gear
 
Mike Jonescuhz's Avatar
 
Join Date: Aug 2019
Age: 30
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Worked

Worked for my 2007 acura mdx both front windows after my battery died thanks.
Old 09-01-2019, 01:49 AM
  #28  
1st Gear
 
Daniel Archer's Avatar
 
Join Date: Sep 2019
Location: CALIFORNIA
Age: 65
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Automatic window

Originally Posted by gogators22
since this thread is being bumped as the "reset" thread, I just wanted to let other members know this DOESN'T WORK.

It's the regulator from what I've read.
Hey the reset worked for me (i had some body work done driver side quarter panel and bumper painted.)
I had to reset the Nav code radio code too..
Old 09-01-2019, 02:09 AM
  #29  
Null and proud of it
 
Midnight Mystery's Avatar
 
Join Date: Mar 2016
Location: Metairie, LA
Age: 27
Posts: 10,375
Received 898 Likes on 788 Posts
My TL did this for 5 minutes one day and the RDX does once in a great while...
Old 01-02-2020, 12:34 PM
  #30  
Suzuka Master
 
Joneill44's Avatar
 
Join Date: Jan 2011
Location: Boston
Age: 32
Posts: 7,998
Received 3,594 Likes on 1,720 Posts
Originally Posted by princelybug
Hmm...

When I had my Audi, this happened to me. I don't know if it'll work on the TL, but try this:

Keep your finger depressed fully on the window switch the whole time you roll down the window. After it is fully down, keep your finger on the switch fully depressed for 2 seconds.

Then, do the opposite when you roll the window up. Keep the switch fully lifted up while the window rolls up, and for an extra 2 seconds after it is fully closed.

Now, try the auto up/down feature and see if it works.

It's worth a try.
Just worked for me!
Old 01-08-2020, 09:44 PM
  #31  
Coming to a city near you
 
Achance's Avatar
 
Join Date: Oct 2000
Location: New Castle, DE
Age: 47
Posts: 1,933
Received 16 Likes on 15 Posts
Do you do the 2 sec hold when car is running or car off and key acc (II) position? I’ve tried both and can’t seem to fix it like I have in the past.
Old 01-09-2020, 10:14 AM
  #32  
Three Wheelin'
 
peter6's Avatar
 
Join Date: Apr 2016
Age: 27
Posts: 1,523
Received 489 Likes on 373 Posts

Old 01-11-2020, 08:36 AM
  #33  
Coming to a city near you
 
Achance's Avatar
 
Join Date: Oct 2000
Location: New Castle, DE
Age: 47
Posts: 1,933
Received 16 Likes on 15 Posts
Originally Posted by peter6
It’s the same process as this video. Still couldn’t get it to work.
Old 01-11-2020, 01:55 PM
  #34  
Three Wheelin'
 
peter6's Avatar
 
Join Date: Apr 2016
Age: 27
Posts: 1,523
Received 489 Likes on 373 Posts
Did you replace the window regulator recently? When I was ordering mine from rockauto, there were two versions, and on had "Automatic window feature" in description and other didn't. Maybe you ordered one that doesn't support this function.
Or you are doing the procedure wrong. It worked many times for me.
Old 01-11-2020, 02:48 PM
  #35  
Coming to a city near you
 
Achance's Avatar
 
Join Date: Oct 2000
Location: New Castle, DE
Age: 47
Posts: 1,933
Received 16 Likes on 15 Posts
Originally Posted by peter6
Did you replace the window regulator recently? When I was ordering mine from rockauto, there were two versions, and on had "Automatic window feature" in description and other didn't. Maybe you ordered one that doesn't support this function.
Or you are doing the procedure wrong. It worked many times for me.
Nope. It's actually on my 2019 hybrid mdx . use to happen on my 04 tl too. It's stopped working 3 times since i've had it. And now I can't fix it. My next oil change isn't for awhile and I don't want to go back to the dealer just for this.
Old 01-12-2020, 12:55 PM
  #36  
Coming to a city near you
 
Achance's Avatar
 
Join Date: Oct 2000
Location: New Castle, DE
Age: 47
Posts: 1,933
Received 16 Likes on 15 Posts
I must have a bad switch. It has fixed itself this morning some how
The following users liked this post:
Midnight Mystery (01-12-2020)
Old 02-27-2020, 06:06 PM
  #37  
1st Gear
 
Pchronicity's Avatar
 
Join Date: Feb 2020
Age: 53
Posts: 1
Received 0 Likes on 0 Posts
2003 Acura TL Type S Window Auto Up/Down Feature Fixed. Viola!

Thank you so very much!
Holding the auto up/down for two extra seconds (I did it for 5) after the window has finished opening/closing all the way worked a treat! Brilliant!
Rarely does one come across a tip that makes such short work of an incredible nuisance.
Serendipity baby!
Old 04-01-2020, 04:14 PM
  #38  
Advanced
 
Tab King's Avatar
 
Join Date: Jun 2019
Location: Suffolk, VA
Age: 31
Posts: 50
Received 10 Likes on 7 Posts
Did you tried to do the window reset by holding the window button down for 30 seconds when the window is all the way down, do the same once the window is all the way up hold it up for 30 seconds that should fix it
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Yumcha
Automotive News
9
02-25-2020 09:57 AM
mazen222
3G TL (2004-2008)
24
10-27-2015 12:01 AM
acurajj
Car Parts for Sale
5
09-19-2015 03:47 PM
ahsm
3G TL Problems & Fixes
3
09-09-2015 08:35 AM


Thread Tools
Search this Thread
Quick Reply: Automatic window feature not working



All times are GMT -5. The time now is 03:21 PM.