boostedorbusted

iTrader: (3)

ok ive searched and search and cant clarify anything. i see a bunch that have done base to type-s motor and tranny. but i want a parts list of what i need to convert my 2G TL-S from auto to 6 speed. who has done the swap on there type-S already and what do i need to do this? thanks in advance.

desired_speeds

please search next time, its actually stickied in the general section: https://acurazine.com/forums/2g-tl-1999-2003-98/6-speed-conversion-591872/

boostedorbusted

iTrader: (3)

ok i read that one isnt it different becuase he went from base to a tl-s motor and tranny? i want to know what i'll need for my type-S?

thinhthan

just read the part with the 6 speed

boostedorbusted

iTrader: (3)

so i need every part on this list? correct


03 CLs-6 speed manual.
03 CLs-6 Manual Engine Harness. 32110-PGE-A11
03 CLs 6 speed ECU
03 CLs-6 Flywheel 22100-PGE-026
03 CLs-6 Flywheel bolts (Qty 8) 90011-PGE-000
03 CLs-6 Clutch Assembly 22105-PGE-305 (unfortunately right now there arent many options for aftermarket clutches)
03 CLs-6 Rear Engine mount and bracket 50810-S3M-A01, 50827-S3M-A00, BOLT (m12X25) 90166-S3M-A00
03 CLs-6 Rearand Front Engine Dampenerand bracket (i would reccomend aftermarket here)
03 CLs-6 Shifter and cables. 54100-S3M-A01, 54310-S3M-A01
03 CLs-6 Starter 31200-PGE-A11 (try to locate used, its expensive)
03 CLs-6 Gauges
03 CLs-6 Hydraulic Clutch lines. 46960-S3M-A01, & 46970-S3M-A01
03 CLs-6 Trans mounts (2 of them) 50806-S3M-A03, 50805-S3M-A03
03 CLs-6 Cup Holder 77230-S3M-A01ZA
03 CLs-6 Parking brake 47105-S3M-A04ZA and to go with it,
Spring 47537-671-670, Nut 47522-594-000, Equalizer pin 47365-538-000, Equalizer 47360-SB2-000
Front cam pulley 14260-PGE-A11
Front plate assembly (behind cam pulley) 11860-PGE-A10
Timing belt pulley(lower) 13621-PGE-A11
Crank shaft sensor 37500-PGE-A11 (this little shit costs $500.00)
Subharness for CKP 37501-PGE-A10
TDC Sensors (Qty 2) 37840-PGE-A11
TDC SUB HARNESS 37841-PGE-A10
If you decide to buy it new BRAKE PEDAL ASSY 46600-S3M-A51
If you decide to buy it new you will need the pedal and mount CLUTCH PEDAL 46910-S3M-A01 & CLUTCH PEDAL BRACKET 46990-S84-A01
MASTER CYLINDER ASSY 46922-S3M-A01 & Clutch Fluid Tank 46965-S5A-013, & Clutch Hose 46961-S3M-A02
(i used the one from the civic i pulled the clutch pedal out of)
Relay box assembly (under hood) 38250-S3M-A21
Shift Boot 83414-S3M-A01ZA
Shift Knob 54102-SL0-023ZB
You will be able to reuse the stock manifolds.


If you already ahve a Type-s you MAY Not need these????
Right side cabin to engine comp harness 32100-S3M-A12
Left side cabin to engine comp harness 32120-S3M-A20
Upper instrument harness 32117-S3M-A31
Lower dash harness 32150-S3M-A32


would i need these harness's aswell? it says youmay not need them , i need to know yes or no.
sorry if this seems like a retarded question i just wanna be 100% sure.

paton5g

I am doing the CL-S 6MT swap into a '96 Integra. With this swap... you really do have to pay to play. I can't believe how expensive the parts are. There's also nothing you can do without. All of the pesky pricey sensors must be in place for it to run.

assclown

iTrader: (1)

that's probably true for your teg, but it really shouldn't be that bad on the TL with RV6 harness.


i changed the color of the parts that you will not need if you get the RV6 Harness to red, the other colors i've just put a note next to them. hopefully it helps. sorry i can't answer too many questions, i'm still in parts collection mode and i'm also doing the engine swap

boostedorbusted

iTrader: (3)

now were talking info. what is this RV6 harness and were do i get 1?

assclown

iTrader: (1)

not allowed to link to it on this site, just do google search for "6 speed obsession" and you'll find it. first link there.

AznWay

iTrader: (8)

He is also AZ vendor BTW

His Sn is Richie V6

Rejckt

iTrader: (2)

Here you go

Type-S to 6MT swap, no motor swapped.
https://acurazine.com/forums/2g-tl-1999-2003-98/my-tl-type-slow-6mt-7-8-psi-748551/