2G TSX Chat, Chit, and General Info Thread
Drifting
LOL When I saw that it was you that made a new reply to this thread I was hoping it wouldn't be about that Yeah, I'm sad, but we pretty much figured everything out now so yeah... Conclusion, fuck that nigga Tyler Kwon. Hoe ass nigga is just using her. Everything the past day was just a huge ass mess.
Now, about the LED's lol... Just make sure there's no power going through the contact points when you insert the LED. That's the easiest way to blow the fuse if you don't. My ghetto LED panels for my front dome is a 3x3 row of SMD LEDs and 2 rows went out. I was tapping/messing with the panel to try to get them to work while it was still on and blew a fuse.
Now, about the LED's lol... Just make sure there's no power going through the contact points when you insert the LED. That's the easiest way to blow the fuse if you don't. My ghetto LED panels for my front dome is a 3x3 row of SMD LEDs and 2 rows went out. I was tapping/messing with the panel to try to get them to work while it was still on and blew a fuse.
all the vids on DIY led's show them changing it with the lights on -,.-
Drifting
lol those are some bad vids then. Always better to have them off. Also since LED's are polarized you have a 50/50 chance of them working when you put them in. If not, you gotta pull them out, flip it around and put it back in which could cause a short frying the fuse.
yea i had my engine just my key in the ignition in the off position
The following users liked this post:
iCrap (10-01-2014)
omg fuck me
i foudn the fuse. i had the diagram backwards
i foudn the fuse. i had the diagram backwards
it works now
Drifting
Join Date: Jun 2012
Location: City of Champs, MA
Age: 32
Posts: 2,969
Received 657 Likes
on
478 Posts
The following users liked this post:
MC MiYoung3269 (10-01-2014)
Drifting
So like... I procrastinated studying for this test I have in my next class until my 2 hour break now, only to realize that I forgot the book at home afer I arrived on campus in my first class....
Moderator
iTrader: (1)
omg you're in college now?
remember when you were 16 and needed mom to take you acurazine meets?
remember when you were 16 and needed mom to take you acurazine meets?
The following 3 users liked this post by justnspace:
Drifting
Lol... yes....
VTEC just kicked in, yo!
Drifting
Lol thanks, Imma prolly need it.... Trying to get what I can from notes I've taken in class >.> 50 question multiple choice.... Art History
Itz JDM y0!
I'm taking AP Art History right now... Uhhhhhhhh.... So much memorization.
VTEC just kicked in, yo!
TSX AMG Type //M i-VVT
lol ap art history...
I have to write a program, do 175 math things and have 2 exams on Friday which i found out about 5 minute ago.. whooooooooooooooooooooo fun!
I have to write a program, do 175 math things and have 2 exams on Friday which i found out about 5 minute ago.. whooooooooooooooooooooo fun!
Moderator
iTrader: (1)
ughhh, I have to look at seismic data all day.
and no, the seismic activity isnt in my pants.
and no, the seismic activity isnt in my pants.
The following 5 users liked this post by justnspace:
iCrap (10-01-2014),
MC MiYoung3269 (10-01-2014),
ssjoeboe9 (10-01-2014),
VR1 (10-01-2014),
xtcnrice (10-01-2014)
Graphite Ghost
iTrader: (2)
a tribute to my Pops - DUKE.
the Striping Viking did a great job.
Tweety brings back lots of memories of my Dad's pet store.
We painted a 4 foot tall Tweety on one of the walls and it always makes me think of him.
Duke has been gone since 1990; I miss him lots.
We worked on all sorts of projects together including our cars.
He was a modder of a Father/
the Striping Viking did a great job.
Tweety brings back lots of memories of my Dad's pet store.
We painted a 4 foot tall Tweety on one of the walls and it always makes me think of him.
Duke has been gone since 1990; I miss him lots.
We worked on all sorts of projects together including our cars.
He was a modder of a Father/
Last edited by robpp; 10-01-2014 at 12:59 PM.
The following 7 users liked this post by robpp:
iCrap (10-01-2014),
iSeeYouTwo (10-02-2014),
justnspace (10-01-2014),
MC MiYoung3269 (10-01-2014),
ssjoeboe9 (10-01-2014),
and 2 others liked this post.
VTEC just kicked in, yo!
if anyone was wondering.... I bought Optimus's PCD.
TSX AMG Type //M i-VVT
VTEC just kicked in, yo!
I think iCrap secretly hates me now
11+ FP still isn't out yet
11+ FP still isn't out yet
TSX AMG Type //M i-VVT
ROTAREDOM
-$670 on clutch components. Even though I know it's needed, it still hurts haha
VTEC just kicked in, yo!
that's pennies compared to your SC and components :wink:
Moderator
iTrader: (1)
Itz JDM y0!
Aero bumper is a huge pita to keep clean.
TSX AMG Type //M i-VVT
wut you bought the aero bumper? front or rear?
Burning Brakes
The following users liked this post:
xtcnrice (10-02-2014)
TSX AMG Type //M i-VVT
probably lol
Itz JDM y0!
TSX AMG Type //M i-VVT
oh i thought you had the Aero / Modulo kit. SE is different than Aero.
ROTAREDOM
but I still have to pay to have it installed
And I know I got quoted on the higher side ($800) but the service center is AT WORK and all they work on is Honda's so they are very familiar AND I drop it off in the morning and they are done in the afternoon.
I guess the extra ~$300 is a security blanket + convience
And I know I got quoted on the higher side ($800) but the service center is AT WORK and all they work on is Honda's so they are very familiar AND I drop it off in the morning and they are done in the afternoon.
I guess the extra ~$300 is a security blanket + convience
Drifting
lol showing off what? There's nothing to show off
another week another scratch
this time on my passenger door
this time on my passenger door
i just should key everyones car i park next to, assuming they are gonna ding mine
VTEC just kicked in, yo!
I don't think it was super cheap for a used item. I've read all the pages of the PCD thread, and at least a couple of guys sold the thing because of the rasp (shame) for about $200. I'm pretty sure there were less than a couple hundred miles on those PCDs too; the rasp likely got to them real quick for them to want to sell it and not deal with it.
The nice thing about optimus's PCD is that it's ceramic coated, and for some reason optimus just seems like a down to earth kind of guy. It was nice dealing with him
I did try to snipe it though, no lie. I saw the thread, and I was like WTF, posted 2 days ago and I didn't even notice? I thought iCrap must've picked it up because he mentioned in a post a while back that he wanted the PCD too lol
Thanks optimus!
The following users liked this post:
optimusaccord (10-02-2014)
VTEC just kicked in, yo!
but I still have to pay to have it installed
And I know I got quoted on the higher side ($800) but the service center is AT WORK and all they work on is Honda's so they are very familiar AND I drop it off in the morning and they are done in the afternoon.
I guess the extra ~$300 is a security blanket + convience
And I know I got quoted on the higher side ($800) but the service center is AT WORK and all they work on is Honda's so they are very familiar AND I drop it off in the morning and they are done in the afternoon.
I guess the extra ~$300 is a security blanket + convience
How's working there btw? When are they gonna fix and release the NSX?! Honda is slacking! Almost every other person with money has a GTR already!
I kid... sorta not really
The following users liked this post:
VR1 (10-02-2014)
VTEC just kicked in, yo!
you should clearbra your whole car. clear bodysuit LOL
the stuff on my doors is more like scuffs, the paint is mostly on there. but seriously its like my car is a rock magnet. i listen to my peabo bryson at like volume 20 and i can hear the little *ping* and yell "FUCKKKK"
ROTAREDOM
I like the idea of the security blanket, but $300 might be a bit of a stretch. I guess it's more of a security blanket + convenience fee. It's right where you work. Come in, work, and leave with new parts installed
How's working there btw? When are they gonna fix and release the NSX?! Honda is slacking! Almost every other person with money has a GTR already!
I kid... sorta not really
How's working there btw? When are they gonna fix and release the NSX?! Honda is slacking! Almost every other person with money has a GTR already!
I kid... sorta not really
The following users liked this post:
xtcnrice (10-02-2014)
Burning Brakes
I think that ceramic coating exhaust is just a good way to go.
I've been doing that on all exhaust parts under the hood for over 10 years...
Say that... I've done that for 10 years... wow... terrifying.
I've been doing that on all exhaust parts under the hood for over 10 years...
Say that... I've done that for 10 years... wow... terrifying.