2003 Acura CL 3.2 S-Type Auto Transmission needed... Pls Help..
#1
Instructor
Thread Starter
2003 Acura CL 3.2 S-Type Auto Transmission needed... Pls Help..
My 2003 Acura CL 3.2 S-Type Transmission (semi-auto) went out. Can anyone please point me in the right direction for a good refurbished or rebuilt quality transmission at a good price? I was searching the web and seen that it was cheaper to buy one than to rebuild one. If any one can help, ill deeply appreciate it. Thanks..
#2
2007 accord trans from a V6?
#4
3.5 psi
iTrader: (1)
yes. Read here: https://acurazine.com/forums/second-...n-swap-905115/
Don't put in another CL trans.
Don't put in another CL trans.
The following users liked this post:
hue_hustler (09-11-2014)
#5
Instructor
Thread Starter
Thanks alot man... I will keep that in-mind.. It turnt out to be the cb-shaft on the passenger side. Busted on me in the middle of the intersection. But got repaired already...
But with all the noise i heard and then it didnt want to move forward, i assumed it was the transmission. it starting feeling like i had in neutral... Thanks again tho..
Now to see if i can get a complete comptech exhaust...
But with all the noise i heard and then it didnt want to move forward, i assumed it was the transmission. it starting feeling like i had in neutral... Thanks again tho..
Now to see if i can get a complete comptech exhaust...
#7
Instructor
Thread Starter
yeah man. it split even like a hot knife thru a stick of butter... so i replaced the cb shaft and drove it up and down the driveway perfectly... but no more driving it until i do the driver side shaft.... i dont wanna put no strain on that half. God knows what shape thats in...
Trending Topics
#8
lowrd on tein CS biatch
iTrader: (2)
i cannot believe it snapped. this is on an auto? wowzers
are u replacing them with honda parts or u getting them from partsource?
FWIW the CL6 guys who snap axles from too much power say they feel the honda shafts are of better quality than generic replacements and thus must be stronger.
are u replacing them with honda parts or u getting them from partsource?
FWIW the CL6 guys who snap axles from too much power say they feel the honda shafts are of better quality than generic replacements and thus must be stronger.
The following users liked this post:
hue_hustler (09-13-2014)
#9
Instructor
Thread Starter
wow man. I didnt think about that. Im new to this Acura thing... Just bought it in july... Im a call honda and price check. I bought the cb shaft from "Car Parts Warehouse"...
#10
trans
getting a used one for our cl's is not route I would take.
same problems. there is a lot of members who went with accord or odyssey late model trans.
just do a search in the forums. a lot of good info.
same problems. there is a lot of members who went with accord or odyssey late model trans.
just do a search in the forums. a lot of good info.
The following users liked this post:
hue_hustler (10-06-2014)
Thread
Thread Starter
Forum
Replies
Last Post
saberlove
2G TL Performance Parts & Modifications
12
03-11-2021 09:29 AM
Mike Bertram
2G TL (1999-2003)
9
09-10-2015 09:27 AM
asahrts
Member Cars for Sale
0
09-04-2015 05:55 PM