Ronjon Sport Design 2001-03 Acura CL Urethane Lip Kit GB
10-28-2005, 09:51 PM
#1
Ronjon Sport Design 2001-03 Acura CL Urethane Lip Kit GB
Ok, here we go...
We have been going back and forth getting the whole project organized with our suppliers and engineers and we got the info here. I worked very hard to get the price down for fellow CL owners, and I def need your support for steppign out on a limb with this short run vehicle which is over 3 years discontinued now.
2001-2003 Acura CL
-Front add on Urethane lip
-Rear add on Urethane lip
-Pair of Urethane Side Skirt add ons
-2 RJSD Emblems
-10" RJSD Vinyl decal
MSRP: $1090 for the whole kit
initial 25 kit limited production price: $950 for whole kit
We are only accepting $200 deposits right now to preorder.
The kits will be ready between Feb-March
Shipping will be $100 or less from UPS
There is no mesh or hardware, the kit installs just like the OEM TL add on kit does, with 3M tape and tapping screws which are not included, but any shop who does the install can provide as part of the installation cost. You can also get this material to mount from Home Depot.
I can promise you, as a current and lifelong owner of the Acura CL, that i will offer this kit in the highest quality styandard as possible, same as our popular TL kit. This kit will give your Acura CL the muscular full bodied look it really needs.
PS, I will be in SEMA until the 6th of Nov, so leave a message and I will return your calls.
Here are the pics:
We have been going back and forth getting the whole project organized with our suppliers and engineers and we got the info here. I worked very hard to get the price down for fellow CL owners, and I def need your support for steppign out on a limb with this short run vehicle which is over 3 years discontinued now.
2001-2003 Acura CL
-Front add on Urethane lip
-Rear add on Urethane lip
-Pair of Urethane Side Skirt add ons
-2 RJSD Emblems
-10" RJSD Vinyl decal
MSRP: $1090 for the whole kit
initial 25 kit limited production price: $950 for whole kit
We are only accepting $200 deposits right now to preorder.
The kits will be ready between Feb-March
Shipping will be $100 or less from UPS
There is no mesh or hardware, the kit installs just like the OEM TL add on kit does, with 3M tape and tapping screws which are not included, but any shop who does the install can provide as part of the installation cost. You can also get this material to mount from Home Depot.
I can promise you, as a current and lifelong owner of the Acura CL, that i will offer this kit in the highest quality styandard as possible, same as our popular TL kit. This kit will give your Acura CL the muscular full bodied look it really needs.
PS, I will be in SEMA until the 6th of Nov, so leave a message and I will return your calls.
Here are the pics:
The following users liked this post:
joejsn (10-26-2019)
10-28-2005, 10:44 PM
#2
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Join Date: Dec 2003
Location: Mooresville, NC
Age: 37
Posts: 43,474
Received 3,661 Likes
on
2,494 Posts
Wow if I had a CL I would buy that kit instantly that is hot.
10-28-2005, 11:43 PM
#4
Burning Brakes
Join Date: Aug 2001
Location: Cincinnati, Ohio
Age: 43
Posts: 815
Likes: 0
Received 2 Likes
on
1 Post
i liked some of the earlier looks for that kit, i think it looks to much like the versus kit that ive had sitting in the basement for 2years now! I like it, but its just too close in looks to the versus kit.
Trending Topics
10-29-2005, 12:05 AM
#8
Originally Posted by Ahmad310
i liked some of the earlier looks for that kit, i think it looks to much like the versus kit that ive had sitting in the basement for 2years now! I like it, but its just too close in looks to the versus kit.
10-29-2005, 12:06 AM
#9
Originally Posted by ANDY03CL-S
Ron that kit is fuckin money! nice job man! 
Is that price $1090 OEM Painted?
Is that price $1090 OEM Painted?
No painted option, its too hard to match from a distance. $1090 is the price for this 25 kit GB, once we are complete with this GB, the price will go back to $1090, if we continue and these all are sold.
10-29-2005, 12:11 AM
#11
Originally Posted by bigwillcl
what size rims are on yours and is there regular color pic of the back? LOOKS HOT!!!
Here's a shot f the back. We might have to do the rear in 3 pieces, to accomodate the exhasut openings, and to make fitment better, but it will look like this:
Edit, look above one post...
10-29-2005, 11:32 AM
#13
Originally Posted by rondog
20" rear, 19" front Devotion-1pF Forged lightweight wheels, check the sig for more info on that Wheel...
Here's a shot f the back. We might have to do the rear in 3 pieces, to accomodate the exhasut openings, and to make fitment better, but it will look like this:
Edit, look above one post...
Here's a shot f the back. We might have to do the rear in 3 pieces, to accomodate the exhasut openings, and to make fitment better, but it will look like this:
Edit, look above one post...
Looking at the rear, is it similar/exactly the same as how the 3rd gen TL A-spec rear looks? (I'm talking about that black/darker area between both exhausts)
10-29-2005, 11:50 AM
#14
Originally Posted by brianlin87
Ron-
Looking at the rear, is it similar/exactly the same as how the 3rd gen TL A-spec rear looks? (I'm talking about that black/darker area between both exhausts)
Looking at the rear, is it similar/exactly the same as how the 3rd gen TL A-spec rear looks? (I'm talking about that black/darker area between both exhausts)
Actually no, simialr, but not exactly the same.
I am going to try to make the rear gray strip across an atachment, to help with exhaust clearance. It will be as simple as possible, like a wide rectangle with a simple groove running the length of the rectangle.
The Acura CL has a very minimialist style. it's only right that we keeop the same style with the kit, so in 10 or 12 years, when the car is a classic, the kit can be considered tastefull. That is when a truly appropriate design really shines, after the trends die out.
BTW, looking good so far, got 4 deposits and a few phone calls. if we pass 25 kits before they are done, i will drop the price once again, but after this run, the price will go back to MSRP of $1090.
10-29-2005, 12:16 PM
#16
Originally Posted by k2boy22
Can I just get the front lip? I will prolly want the front and the back. So will you PM me both prices. THanks
10-29-2005, 02:42 PM
#24
Suzuka Master
Originally Posted by NFLblitze1
u gonna trash ur old kit and get the RJ kit?
I don't have a kit. I've been waiting for this kit since I put down my deposit in February.
10-29-2005, 05:15 PM
#27
ny'r residing in maine
Join Date: Feb 2005
Location: Portland, Maine
Age: 43
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
You're the F%$#in man ron!!!!!!!!! That is the best looking body kit available for our rides, not too gaudy or crazy, it will make the cl look, as you said, classic. Do you think the exhaust holes will leave enough room for those of us with larger cans on our exhaust ( i have the greddy evo2)? Thanks for your dedication to us, now it's in our hands to get enough people, i'm down so check your email tonight!!!!!!!
can't wait.
10-29-2005, 08:50 PM
#31
Originally Posted by getright
You're the F%$#in man ron!!!!!!!!! That is the best looking body kit available for our rides, not too gaudy or crazy, it will make the cl look, as you said, classic. Do you think the exhaust holes will leave enough room for those of us with larger cans on our exhaust ( i have the greddy evo2)? Thanks for your dedication to us, now it's in our hands to get enough people, i'm down so check your email tonight!!!!!!!
PM me to send in paypal, with the 3% or whatever it is now. Can't wait, i'm just as anxious to do this as youy guys.
10-30-2005, 12:21 PM
#34
Originally Posted by CleanCL
ron,
im on long island and dont know/trust any body shops, i know you are in the area, if i get the kit would you be able to recommend a shop?
im on long island and dont know/trust any body shops, i know you are in the area, if i get the kit would you be able to recommend a shop?
10-30-2005, 03:51 PM
#35
Burning Brakes
Ron - Im want to stop by your office and give you a deposit tomorrow (Monday). I was wondering if your car will be there so I can take a look at the kit in person. Whether your CL is there or not Im definatly buying it because you are making the nicest kit for this car... im so anxious 
10-30-2005, 04:15 PM
#36
Changin bulbs since '73
iTrader: (1)
Join Date: Dec 2001
Location: Chi-town burbs
Age: 50
Posts: 8,111
Likes: 0
Received 12 Likes
on
4 Posts
Ronny, you did it! I see you changed the front to look real subtle. I like it. I don't have the money to do this but I am going to do it anyway because you are taking a chance for us. I will
callin on monday!! Thanks dude!
callin on monday!! Thanks dude!
10-30-2005, 04:42 PM
#37
My Work is Done Here
Join Date: Jun 2004
Location: Still too far from the beach
Posts: 11,134
Likes: 0
Received 2 Likes
on
1 Post
Originally Posted by MSW 6SP
Ron - Im want to stop by your office and give you a deposit tomorrow (Monday). I was wondering if your car will be there so I can take a look at the kit in person. Whether your CL is there or not Im definatly buying it because you are making the nicest kit for this car... im so anxious
um the kit on his car in the pic is photoshopped. It hasn't been made yet, so you'd probably just be looking at a modified versus kit in person.
10-30-2005, 05:06 PM
#38
Once again, thanks for the support, and unfortuneatly, my car is already being transported to CA for the project to get started. I am working on some other angle concept illustrations to post when i get back from SEMA. So if you call in and get an answering machine, just leave a message. I will contact everyone when i get back in less than a week.
10-31-2005, 01:45 AM
#40
That's Racist
Join Date: Aug 2004
Location: San Diego native. UCLA resident. =)
Age: 38
Posts: 5,634
Likes: 0
Received 0 Likes
on
0 Posts
I am also wondering that about this kit ron.
Also, I'm concerned that I might have to get my muffler canisters lowered a bit. Right now, they are at just about perfect height with the stock rear bumper cut outs. Would I have to get the mufflers to sit lower?
Also, I'm concerned that I might have to get my muffler canisters lowered a bit. Right now, they are at just about perfect height with the stock rear bumper cut outs. Would I have to get the mufflers to sit lower?