Magnaflow 14832 Installed
02-19-2006, 01:54 PM
#1
Burning Brakes
Thread Starter
iTrader: (2)
Join Date: Jul 2003
Posts: 901
Likes: 0
Received 0 Likes
on
0 Posts
Magnaflow 14832 Installed
Like the title says, I finally got these installed. I had the shop make me a custom axleback that can be bolted-on and off whenever I like. I got the exhaust at a great price of $140 shipped, and paid about $120 for the install (they did a great job). In the end, I got a great sounding and looking exhaust for under $300. The sound is great, it is exactly what I wanted, not insanely loud but throaty. Enough talk, here are some pics:
02-19-2006, 02:36 PM
#2
Above n Beyond
Nice man. Tell us how it sounds. Nice deep tone at low rpm's? How does it sound after 3k+ rpms? tone go away? Also, can you take a pic of the exhaust straight on from like 10+ feet away. Congrats again and sweet deal on it too!
02-19-2006, 03:02 PM
#3
Burning Brakes
Thread Starter
iTrader: (2)
Join Date: Jul 2003
Posts: 901
Likes: 0
Received 0 Likes
on
0 Posts
Thanks. There is a nice deep throaty sound at low rpms, that you really can't hear much at VTEC. I think the higher RPMs are a tad bit louder and deeper, but the majority of the difference is heard 1000-4000 RPMs. Also, taking of in first has a real pleasant rumble and when I downshift from say 3rd to 2nd, there is a little feedback and sometimes popping (I like the sound).
There isn't much droning at all, maybe in 6th gear at around 60-63mph, if you give a little more gas then necessary you will experience *minor* droning. I will take a pic once I get a chance.
There isn't much droning at all, maybe in 6th gear at around 60-63mph, if you give a little more gas then necessary you will experience *minor* droning. I will take a pic once I get a chance.
02-19-2006, 04:06 PM
#5
if you ever replace your b-pipe you will probably experience heavier droning
but these are nice mufflers, good choice on the tips their perfect, and the work looks nice and clean, looks like they replaced the entire axleback pipe and didn't just do a chop and weld job
but these are nice mufflers, good choice on the tips their perfect, and the work looks nice and clean, looks like they replaced the entire axleback pipe and didn't just do a chop and weld job
I'm looking at diffrent setups and i definitely would like to hear these...
Trending Topics
02-19-2006, 07:20 PM
#8
Burning Brakes
Thread Starter
iTrader: (2)
Join Date: Jul 2003
Posts: 901
Likes: 0
Received 0 Likes
on
0 Posts
Willdogs does a good job with documenting how the exhaust sounds in this thread:
https://acurazine.com/forums/showthr...ight=Magnaflow
https://acurazine.com/forums/showthr...ight=Magnaflow
02-19-2006, 10:24 PM
#10
Instructor
Join Date: Aug 2005
Location: Miami, Fl.
Age: 43
Posts: 180
Likes: 0
Received 0 Likes
on
0 Posts
You got both mufflers for 140 shipped, wow, from were??
The cheapest i find em for is 128 each, shipped.
Can you compare the exhaust note to any other car?
Is it quiet in the car with the windows up?
Oh yeah looks great
The cheapest i find em for is 128 each, shipped.
Can you compare the exhaust note to any other car?
Is it quiet in the car with the windows up?
Oh yeah looks great
02-19-2006, 11:00 PM
#11
Burning Brakes
Thread Starter
iTrader: (2)
Join Date: Jul 2003
Posts: 901
Likes: 0
Received 0 Likes
on
0 Posts
Yeah I got it from hottexhaust.com and a friend of mine had a 15% off coupon code and free shipping. I can't really compare it to any other car, it's unique in its own way. Also, it is not too loud with the windows up, just nice and throaty. You can hold conversations and talk on the phone, not crazy at all.
Now drop that monster truck already! 
02-21-2006, 10:01 AM
#14
6th Gear
Join Date: Jan 2006
Location: miami
Age: 38
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
wish I would have had that coupon... 
Item 1
Product ID: 14832
Product Name: 14x5x8 2.25/4 S-DW-R-S-S ProductID=14832
Product Price: $91.01
Quantity: 2
SubTotal: $182.02
Shipping: $0.00(Free Shipping)
Handling: $0.00
State Tax: $0.00
Country Tax: $0.00
Grand Total: $182.02
Item 1
Product ID: 14832
Product Name: 14x5x8 2.25/4 S-DW-R-S-S ProductID=14832
Product Price: $91.01
Quantity: 2
SubTotal: $182.02
Shipping: $0.00(Free Shipping)
Handling: $0.00
State Tax: $0.00
Country Tax: $0.00
Grand Total: $182.02
02-21-2006, 11:58 AM
#16
SOLD 9/11/06 Parts 4 Sale
Join Date: Aug 2005
Location: Howard Beach, NY
Age: 66
Posts: 486
Likes: 0
Received 0 Likes
on
0 Posts
i have the same set up with the same mufflers.... they did a custom job for me to so that i can take them off and put the stock on if i want. anyway here are some tips sound wise...
you can make the sound a lot louder and deeper after you race around like do 1 run from stop. floor it the whole time all the way up to 7k rpm in first and second gear and after you do that when you drive around normaly for like 30 min your car is ganna sound so sick.... it gets a lot louder and deeper. it will also get louder and deeper when it is very cold out like 15-25 degrees.
i want to take my resonator out to get more sound out of them because they sound so deep.... does anyone know how much it is to do a streight pipe for the resonator???
and you will get a deep tone also when your are doing around 60mph and your rpm is at 3500 and just give it a little gas... you hear it best when you are in a tunnel... thats when it gets loud.
you can make the sound a lot louder and deeper after you race around like do 1 run from stop. floor it the whole time all the way up to 7k rpm in first and second gear and after you do that when you drive around normaly for like 30 min your car is ganna sound so sick.... it gets a lot louder and deeper. it will also get louder and deeper when it is very cold out like 15-25 degrees.
i want to take my resonator out to get more sound out of them because they sound so deep.... does anyone know how much it is to do a streight pipe for the resonator???
and you will get a deep tone also when your are doing around 60mph and your rpm is at 3500 and just give it a little gas... you hear it best when you are in a tunnel... thats when it gets loud.
02-21-2006, 12:56 PM
#18
Don't Mess With Texas
Originally Posted by blueglows
i have the same set up with the same mufflers.... they did a custom job for me to so that i can take them off and put the stock on if i want. anyway here are some tips sound wise...
you can make the sound a lot louder and deeper after you race around like do 1 run from stop. floor it the whole time all the way up to 7k rpm in first and second gear and after you do that when you drive around normaly for like 30 min your car is ganna sound so sick.... it gets a lot louder and deeper. it will also get louder and deeper when it is very cold out like 15-25 degrees.
i want to take my resonator out to get more sound out of them because they sound so deep.... does anyone know how much it is to do a streight pipe for the resonator???
and you will get a deep tone also when your are doing around 60mph and your rpm is at 3500 and just give it a little gas... you hear it best when you are in a tunnel... thats when it gets loud.
you can make the sound a lot louder and deeper after you race around like do 1 run from stop. floor it the whole time all the way up to 7k rpm in first and second gear and after you do that when you drive around normaly for like 30 min your car is ganna sound so sick.... it gets a lot louder and deeper. it will also get louder and deeper when it is very cold out like 15-25 degrees.
i want to take my resonator out to get more sound out of them because they sound so deep.... does anyone know how much it is to do a streight pipe for the resonator???
and you will get a deep tone also when your are doing around 60mph and your rpm is at 3500 and just give it a little gas... you hear it best when you are in a tunnel... thats when it gets loud.
02-21-2006, 01:27 PM
#19
SOLD 9/11/06 Parts 4 Sale
Join Date: Aug 2005
Location: Howard Beach, NY
Age: 66
Posts: 486
Likes: 0
Received 0 Likes
on
0 Posts
damn! i just want a little more sound!!! how bout a high flow cat? and i have to figure out some way to stop the header hissing noise (resonance) or at least quiet it down a little so i can hear the exhaust more...
02-21-2006, 05:23 PM
#22
SOLD 9/11/06 Parts 4 Sale
Join Date: Aug 2005
Location: Howard Beach, NY
Age: 66
Posts: 486
Likes: 0
Received 0 Likes
on
0 Posts
its a resonator that quiets it down even more... thats what i was talking about... i want to take that out and put a streight pipe instead... some ppl say it sounds loud but its a v6 3.2 with a good exhaust system... i dont think its possible for it to sound like a little v4 ricer...
i have megan 4th batch headers...
i have megan 4th batch headers...
02-21-2006, 07:53 PM
#25
Above n Beyond
I have heard CL's on here with different exhaust set ups that sound almost like a 4 cyl. That's why I was planning on going with Magnflow or Comptech cause I know they dont.
02-23-2006, 09:29 AM
#26
Rookie Season
Join Date: Feb 2006
Location: Seacoast, NH
Age: 47
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
After agonizing over which exhaust system to get, I've come to believe that this magnaflow custom install is the best value.
The sound clips posted on here are ridiculous, a really deep and mellow sound and the total installed cost is right around $300 - basically 1/2 the price of the Comptech. I made an appointment for next Weds with a custom exhaust shop here in NH... my cans should arrive Monday or Tuesday.
Kudos to you guys who developed this mod, I never would have considered it otherwise and now I can spend my savings on an IceBox!!
The forum members on here are kick ass!
The sound clips posted on here are ridiculous, a really deep and mellow sound and the total installed cost is right around $300 - basically 1/2 the price of the Comptech. I made an appointment for next Weds with a custom exhaust shop here in NH... my cans should arrive Monday or Tuesday.
Kudos to you guys who developed this mod, I never would have considered it otherwise and now I can spend my savings on an IceBox!!
The forum members on here are kick ass!
02-23-2006, 02:34 PM
#30
6th Gear
Join Date: Jan 2006
Location: miami
Age: 38
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SILVER-TYPE-S
After agonizing over which exhaust system to get, I've come to believe that this magnaflow custom install is the best value.
The sound clips posted on here are ridiculous, a really deep and mellow sound and the total installed cost is right around $300 - basically 1/2 the price of the Comptech. I made an appointment for next Weds with a custom exhaust shop here in NH... my cans should arrive Monday or Tuesday.
Kudos to you guys who developed this mod, I never would have considered it otherwise and now I can spend my savings on an IceBox!!
The forum members on here are kick ass!
The sound clips posted on here are ridiculous, a really deep and mellow sound and the total installed cost is right around $300 - basically 1/2 the price of the Comptech. I made an appointment for next Weds with a custom exhaust shop here in NH... my cans should arrive Monday or Tuesday.
Kudos to you guys who developed this mod, I never would have considered it otherwise and now I can spend my savings on an IceBox!!
The forum members on here are kick ass!
02-23-2006, 03:56 PM
#32
Burning Brakes
Thread Starter
iTrader: (2)
Join Date: Jul 2003
Posts: 901
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by UNCTYPE-S
After much decisioning........I am getting mine installed on Saturday. Can't wait!!
I recently bought headers also, I'll have to see how that changes the exhaust tone (if any).
02-23-2006, 04:33 PM
#34
Above n Beyond
^I have thought about that, but I might go for the change and keep the Magnaflow tips.
Moodist- I had Magnaflows on my last car and loved them, so from the looks and sound of these, I dont think I will be disappointed. I do have Comptech Headers and Icebox, so it should be an interesting mix to see the combination of sound throughout the rpm band.
Moodist- I had Magnaflows on my last car and loved them, so from the looks and sound of these, I dont think I will be disappointed. I do have Comptech Headers and Icebox, so it should be an interesting mix to see the combination of sound throughout the rpm band.
02-25-2006, 04:04 PM
#36
Above n Beyond
Just got them installed today! Looks and sounds awesome. Leave a note of what you think. 
https://acurazine.com/forums/showthread.php?t=178362
https://acurazine.com/forums/showthread.php?t=178362
03-06-2006, 09:00 PM
#38
proffesion...axle breaker
Moodist: did they mandrel bend the piping?? cuz the place im going to says theyre going to have to cut the flange, because its too close, and they dont madrel bend at all, they crush bend ....which means i cant return to stock if i want. and i want that luxury too do so. and they quoted me for $175 ..which i also think thats too much, what u guys think???
03-07-2006, 11:33 AM
#39
Rookie Season
Join Date: Feb 2006
Location: Seacoast, NH
Age: 47
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Find another place is my suggestion. I had mine mandrel bent with all stainless pipe stock and custom built flanges to hook up directly to the Y-Pipe for $170. Don't cheap out on this mod, you'll want to get all the money if you ever trade that bad-boy in. Plus you can sell your magnaflow system on e-bay for good money as a bolt-on system.