mjgreencs

Wassup Acurazine,

So I've done a lil research and I'm trying to add a little more kick to my car. So far I'm looking at new headers which I found online and also I just wanted to throw a Cat Delete/Test pipe on it regardless to the sound but unfortunately I can't seem to find one specifically made for my car. Does anybody know where I can find a Test pipe/Cat Delete that will fit? Also, I'm open to any other reasonable performance options, I don't plan on seriously racing or anything beside just some fun at the stop light every now and then. I do want my car to last and don't wanna spend hella bread on a turbo/supercharge kit.

gnuts

iTrader: (1)

just have a shop make the pipe. flange, pipe with O2 extension, flange.

R J Poseidon 6

...but beware it'll probably sound poopy

gnuts

iTrader: (1)

make sure the headers have a bend in the rear bank primaries to clear the 6speed rear motor mount. I would forgo the test pipe and get an under drive crank pulley.

microracer24

Here is a test pipe...

https://store.excelerateperformance..../i-494446.aspx

microracer24

Is the under drive pulley still available? I found the lightweight pulleys but in the standard size

gnuts

iTrader: (1)

you can get the pulleys from Ralco much cheaper than UR. I think they have stock and underdrive.

spaceghostpurrp

This one fits, but you need to make this one hole bigger so one of the bolts could fit

https://www.amazon.com/1998-2002-Hon...a+98+test+pipe

mjgreencs

I also trying to figure out the best way to get the rear header bolts off I can barely fit my arm back there I thought about removing the sway bar or should I lift the car and try from beneath.

03 tls nc

iTrader: (6)

A test pipe for an 02 Accord V6 will fit, got one for about $25 shipped off Ebay. XS Power headers are an exact copy of Comptech and clear the 6 speed mount (Have both FYI). Under drive pulley can also be found on Ebay for pretty cheap.