mattcl-s

Hello everyone I been doing some research but I cannot find information about putting 2010 RL calipers on a 03 cls6...do they bolt right up? do I need bigger rotors? can someone help me out with this found some for 250$ seems pretty legit deal

mattcl-s

I found a little something that I will need a different brackets to make the rotors work

mattcl-s

seems like in need 350z rotors and a bracket anyone know the part number and where I can get them from?

coopcoop30

If my memory serves me correctly and it may not. I think they need to be specially made. If you find out who makes it let me know because I would be interested.

gnuts

iTrader: (1)

you can buy the bracket from Fastbrakes. there are a few threads here covering everything.

aznboi2424

iTrader: (10)

You need 350Z TRACK edition rotors. They must be for the TRACK edition because they are larger then the regular 350Z rotors.

Scottyknows007

Talked to fastbrakes a while back and he also told me you can use a 2010 Nissan Sentra SE-R Spec V rotors. They will fit also and you wont run into the issue of the sides of the calipers rubbing the rotor as it spins.

aznboi2424

iTrader: (10)

I never had that problem before.

So does that mean that the 350Z rotors are thicker than the Sentra rotors?

Scottyknows007

That's what it sounded like. He was telling me that some people were actually grinding down the inside of the caliper to clear the rotor, and that the Sentra should work better and not have this problem. But it WASN'T guaranteed... it might still rub

mattcl-s

waited to long looking for this bracket and calipers were sold... oh well

bigdaddyKA8

iTrader: (5)

They come up on the BM pretty often if I recall correctly. I have a spare set I may be selling soon.