Dealer says subframe needs replaced - is it really that bad? - AcuraZine Community

Go Back   AcuraZine Community > AcuraZine TSX Community > Second Generation TSX Discussion (2009+) > Problems & Fixes
Sign in using an external account
Register Forgot Password?
Search

Reply
 
 
 
submit to reddit
 
LinkBack Thread Tools Search this Thread
Old 01-16-2012, 8:26 AM   #1
New Member
 
Trader Rating: (0)
Join Date: Aug 2010
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Points: 1,055, Level: 17
Points: 1,055, Level: 17 Points: 1,055, Level: 17 Points: 1,055, Level: 17
Activity: 0.2%
Activity: 0.2% Activity: 0.2% Activity: 0.2%
Dealer says subframe needs replaced - is it really that bad?

Long story short, I was caught not paying attention and smacked a curb in my '10 TSX. A new tire and a couple of zip ties later to the splash shielf and I was back in business.

At my last oil change, I asked the dealer to see if they could straighten out my steering wheel which had been cocked slightly to the right. The car tracks perfectly driving, accelerating and braking.

After their "alignment" (which didn't fix an out of spec issue on the rear), they decided that my curb check damaged the subframe, and that it needed to be replaced to the tune of $2,500.

My alignment specs are as follows:

Front Left
Camber: -0.1
Caster: 2.0
Toe: -0.06in
SAI: 8.9
Included Angle: 8.8

All else is in line. This also looks to throw out the Cross Caster (-1.5) and Total Tow (-0.09).

Given that the only symptom present is a slightly out of center steering wheel, am I crazy for thinking about leaving it as is? Or, will neglecting this leave the door wide open to other problems down the road?

Thanks for the help!
This ad is not displayed to registered or logged-in members.
Register your free account today and become a member on Acurazine!
racingjay is offline   Reply With Quote
Old 01-16-2012, 11:06 AM   #2
Registered Member
 
Trader Rating: (0)
Join Date: Aug 2006
Location: West Burbs, Chicago
Age: 30
Posts: 769
Thanks: 112
Thanked 80 Times in 54 Posts
Points: 9,916, Level: 66
Points: 9,916, Level: 66 Points: 9,916, Level: 66 Points: 9,916, Level: 66
Activity: 1.1%
Activity: 1.1% Activity: 1.1% Activity: 1.1%
pics?
thunderbt3 is offline   Reply With Quote
Old 01-16-2012, 11:18 AM   #3
 
justnspace's Avatar
 
Trader Rating: (0)
Join Date: Feb 2010
Age: 27
Posts: 48,693
Thanks: 10,820
Thanked 8,098 Times in 5,826 Posts
Points: 38,213, Level: 100
Points: 38,213, Level: 100 Points: 38,213, Level: 100 Points: 38,213, Level: 100
Activity: 100.0%
Activity: 100.0% Activity: 100.0% Activity: 100.0%
the 3G TL has a alum. subframe.

i wrecked into a curb. my axles were unscathed but my subframe was bent.
dont know if the subframe can cause alignment problems, but I'm getting a new subframe put in.

hope this helps.
justnspace is offline   Reply With Quote
Old 01-16-2012, 11:28 AM   #4
WTH happened to my garage
 
HeavyDuty's Avatar
 
Trader Rating: (0)
Join Date: Sep 2008
Location: Jacksonville, FL
Age: 47
Posts: 1,744
Thanks: 13
Thanked 67 Times in 50 Posts
Points: 6,629, Level: 53
Points: 6,629, Level: 53 Points: 6,629, Level: 53 Points: 6,629, Level: 53
Activity: 0%
Activity: 0% Activity: 0% Activity: 0%
If you want a 2nd opinion, check with a body shop. They use gigantic calipers to measure critical points on the body and subframes, suspension components, etc. & will be able to tell you 100% which component is bent or compromised.
__________________
2005 Odyssey Touring...with...uh...run flats?
1998 Tacoma PreRunner, Michelilns, cold air, Bilsteins, cigarette burns in the seat.
1995 Nissan w/stuff
HeavyDuty is offline   Reply With Quote
Old 01-16-2012, 3:55 PM   #5
ceb
Registered Member
 
Trader Rating: (0)
Join Date: May 2011
Posts: 2,921
Thanks: 50
Thanked 691 Times in 501 Posts
Points: 6,016, Level: 50
Points: 6,016, Level: 50 Points: 6,016, Level: 50 Points: 6,016, Level: 50
Activity: 36.9%
Activity: 36.9% Activity: 36.9% Activity: 36.9%
Quote:
Originally Posted by HeavyDuty View Post
If you want a 2nd opinion, check with a body shop. They use gigantic calipers to measure critical points on the body and subframes, suspension components, etc. & will be able to tell you 100% which component is bent or compromised.
Correct, but if your subframe is tweaked then it will need to be replaced.

A cockeyed steering wheel combined with alignment specs that cannot be brought to specs then the cause needs to be resolved. You will go through tires and wear other suspension bits much faster until you fix it.

You will need to fix it anyway before you sell the car.
ceb is offline   Reply With Quote
Old 01-16-2012, 8:53 PM   #6
Карты убийцы
 
Professor's Avatar
 
Trader Rating: (0)
Join Date: Apr 2003
Location: Cochabamba, Bolivia
Age: 44
Posts: 8,217
Thanks: 77
Thanked 122 Times in 97 Posts
Points: 26,989, Level: 97
Points: 26,989, Level: 97 Points: 26,989, Level: 97 Points: 26,989, Level: 97
Activity: 27.4%
Activity: 27.4% Activity: 27.4% Activity: 27.4%
I don't know how fast you were going when you hit the curb, but if the tire popped, I'm guessing pretty fast. I'm surprised you didn't bend a rim.

The thing about a suspensions is that they usually can take sudden drops better than sudden rises like a curb.

Nevertheless, the tubular construction of a subframe is very strong. I'd have them put it on a lift to see the damage myself.

Your camber number is o.k. The wheel is basically running even. The caster number is a little off, and it can not be adjusted. It would say something is bent, but it shouldn't impact your tire-wear. The toe is such a small number that my cat could piss on your tire and bring it to 0.

http://www.familycar.com/Alignment.htm
__________________
In search of satiating pleasures both subtle and grotesque.
"Al esfuerzo y al heroísmo de una revolución... ¡No los queremos! ¡No los necesitamos!"
"Because it has all been said. Everyone has heard, everything seen...There's nothing left to say!" - The Q Continuum
Professor is offline   Reply With Quote
Old 01-16-2012, 9:15 PM   #7
Карты убийцы
 
Professor's Avatar
 
Trader Rating: (0)
Join Date: Apr 2003
Location: Cochabamba, Bolivia
Age: 44
Posts: 8,217
Thanks: 77
Thanked 122 Times in 97 Posts
Points: 26,989, Level: 97
Points: 26,989, Level: 97 Points: 26,989, Level: 97 Points: 26,989, Level: 97
Activity: 27.4%
Activity: 27.4% Activity: 27.4% Activity: 27.4%
Oopps... with that being written, I would say that I like going down the road with the steering wheel straight up and down with no shimmies in it or pulling to one side or the other.

Get it on a lift, and look at the damage from a non-invested party (i.e., not Acura).
__________________
In search of satiating pleasures both subtle and grotesque.
"Al esfuerzo y al heroísmo de una revolución... ¡No los queremos! ¡No los necesitamos!"
"Because it has all been said. Everyone has heard, everything seen...There's nothing left to say!" - The Q Continuum
Professor is offline   Reply With Quote
Old 01-24-2012, 9:14 AM   #8
Registered Member
 
Trader Rating: (0)
Join Date: Aug 2008
Posts: 77
Thanks: 0
Thanked 0 Times in 0 Posts
Points: 4,334, Level: 41
Points: 4,334, Level: 41 Points: 4,334, Level: 41 Points: 4,334, Level: 41
Activity: 0%
Activity: 0% Activity: 0% Activity: 0%
go to somewhere else it most likely a bent inner tierod subframes are pretty sturdy unless u smacked the curb at like 50+
Endika is offline   Reply With Quote
Old 01-24-2012, 9:16 AM   #9
 
justnspace's Avatar
 
Trader Rating: (0)
Join Date: Feb 2010
Age: 27
Posts: 48,693
Thanks: 10,820
Thanked 8,098 Times in 5,826 Posts
Points: 38,213, Level: 100
Points: 38,213, Level: 100 Points: 38,213, Level: 100 Points: 38,213, Level: 100
Activity: 100.0%
Activity: 100.0% Activity: 100.0% Activity: 100.0%
I bent my aluminum subframe going about 35mph. I hit a curb.

I'm just saying, its easier than you guys think to bend the subframe.
if the OP's is bent, I would get that corrected. a new one needs to be put in.
justnspace is offline   Reply With Quote
Old 01-24-2012, 9:44 AM   #10
7# werC 2uoYeeS
 
mrstak's Avatar
 
Trader Rating: (1)
Join Date: Mar 2011
Location: NYC
Posts: 3,370
Thanks: 225
Thanked 494 Times in 374 Posts
Points: 6,384, Level: 52
Points: 6,384, Level: 52 Points: 6,384, Level: 52 Points: 6,384, Level: 52
Activity: 7.9%
Activity: 7.9% Activity: 7.9% Activity: 7.9%
Quote:
Originally Posted by justnspace View Post
I bent my aluminum subframe going about 35mph. I hit a curb.

I'm just saying, its easier than you guys think to bend the subframe.
if the OP's is bent, I would get that corrected. a new one needs to be put in.
Was it when you were doing donuts around a lamppost?

Just wondering, how much did it cost to fix your sub frame? What does it entail also...?
__________________
2009 TSX Tech in PMM - Totaled
2012 TSX Tech in GLM
mrstak is offline   Reply With Quote
Old 01-24-2012, 9:44 AM
AcuraZine
Acura Integra




Paid Advertisement


 
 
 
submit to reddit
Reply

Tags
2010, 2012, acura, acurazine, adjustment, alignment, caster, cost, frame, rl, rsx, specs, straightening, subframe, tsx, tweek

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -5. The time now is 1:45 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.

Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Acurazine.com content, comments, or advertising. Acurazine.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Acurazine.com in any way. Copyright/trademark/sales mark infringements are not intended or implied.
Passwords Backup