remove the 36mm axle nut, remove the 17mm ball joint castle nut and break the ball joint loose from the LCA, remove the 17mm nut and bolt from the strut fork then pry the axle out of the trans with a prybar on the drivers side and for the right side separate the halfshaft and axle using a hammer and prybar.
08 Mazdaspeed3,03 Acura 3.2 TL,98 Acura 3.5 RL
request Matt for service at Norris Acura
Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Acurazine.com content, comments, or advertising. Acurazine.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Acurazine.com in any way. Copyright/trademark/sales mark infringements are not intended or implied.