zubi23

hey guys. my xenon blue LED DRLs that I bought from ijdmtoy are out. I got some replacement 9005 bulbs from ebay that are 5k and was putting them in today. Guess what? they aren't fitting where my original LED DRLs connected. I feel like the pins are a little different or something. For the ijtmtoy harness kit, do 9005 bulbs fit or did I get wrong size, or did I get ripped off from ebay?

these are the ones I bought from ebay: http://www.ebay.com/itm/191188345115?_trksid=p2060778.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

zubi23

I just checked again and I noticed rust forming on the connector where my original LED DRLs are plugged in. Also on the 9005 LED DRL bulbs that I bought from ijdmtoy, the pins are rusted up. Not sure if that's what might be the issue, because I pushed the new 9005 bulbs in and they went in to the connector, but its all rusted up. I'm not really sure how.

mvp2765

iTrader: (1)

My JDM bulbs rather broke before burning out. I bought 5$ amazon replacements and they've been working great. JDM's bulbs suck

08NJCpe

Did you guys get an error code for these bulbs?

Also, anyone running these from ebay:
http://www.ebay.com/itm/380371539274?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

zubi23

No I didn't get an error code. They were working fine for a yr then they started flickering then they just went out. I think the rust might be the problem

guitarplayer16

iTrader: (8)

Their tower LEDs always have problems eventually.

I bought LEDs from JLC to use with their harness.

I also electric tape every connection to prevent moisture from getting in.