AcuraZine - Acura Enthusiast Community - Shift Lock Release slot cover

AcuraZine - Acura Enthusiast Community (https://acurazine.com/forums/)

- 2G TL (1999-2003) (https://acurazine.com/forums/2g-tl-1999-2003-98/)

- - Shift Lock Release slot cover (https://acurazine.com/forums/2g-tl-1999-2003-98/shift-lock-release-slot-cover-630256/)

Shift Lock Release slot cover

Anyone know where I can get one of these? As you can see, mine is missing. Thanks!

http://i2.tinypic.com/7y5pm5e.jpg

anywhere else? online maybe? dealer is too far away.

i need one too. i wonder what a dealer would charge for it?

mine's missing too. who the hell would take these >.>

found it at acura online e-store:

021 LID, ESCUTCHEON *NH286L* INFO $6.79

total including shipping comes out to be $15 or pick up at dealer for 6.79..

debating whether to get it or not :/

get it
car looks cleaner with it.

yeah mang, 7 bucks. shit might fall in there ya know

okay i will get it.

a tip to those buying: try selecting alternate dealers, as the price varies. the other one near me sells is for 3.88 which seems to be the cheapest around..

yea g mine is gone too. but i live in the uk so shipping will be rediculous for a piece of plastic. unless i go tdy to the states soon....or maybee someone can pick one up for me and send it to my apo address via usps. come on help a brother out..

yeah i can hook you up, when i get some money again lol, so broke.
ill pm you when i get my hands on a few

Quote:

Originally Posted by wilp99

Or you might be able to get one from Japan for the Saber. Now that I think about it, I doubt that would be any cheaper. :tomato:

Quote:

Originally Posted by co1063

found it at acura online e-store:

021 LID, ESCUTCHEON *NH286L* INFO $6.79

total including shipping comes out to be $15 or pick up at dealer for 6.79..

debating whether to get it or not :/

$15 for a lil tiny piece of plastic, wow, rofl

Quote:

Originally Posted by Razzi

yeah i can hook you up, when i get some money again lol, so broke.
ill pm you when i get my hands on a few

let me know.. ill def take you up on it.. thanks.

my stuff came today! got a shift lock cover, the plate around the shift lock cover (old one was scratched and dirty) and 2003 cupholders. let me tell you the cupholders are a direct fit and are so much better than my old ones..

http://i9.tinypic.com/6tvj5sm.jpg

Nice. Yea I like those cupholders better. I have them on my 99 as well. Soon to be replaced by the 03 CL-S cupholders though.

^^^ PM me when you get to doing the conversion, I may want the cupholders to tide me over till I can do the 03 CL-S center console swap.

how much do the cupholders cost? one of the covers on mine is busted, it doesnt spring open anymore

the cupholders are cheap around $10, but the doors are seperate.

You can take them apart and fix them. Mine was stuck a while back but you can mess with it and try and fix it first.

From https://acurazine.com/forums/showthread.php?t=147164

Quote:

Originally Posted by MurkyRiversTL

Ok, so I had the same problem with mine. And I know it seems like a lot of work, but you just got to start taking shit apart to figure it out some times.

I started by removing the "wood" trim on the sides of the center console. This is where your screws are to remove the cup holder. so just start unscrewing. but make sure you know where all the screws go (makes it easier for reinstall)

I think you might have to remove the 2 screws that are in the bottom of the storage area under you arm rest.

anyway, once you have the cup holder out, you should be able to see all the gears (4 I think) and you just got to reset them so that both doors open and close at the same time. you can also adjust the gapping when closed.

Now if you gear is not there, chances are it might be under your shifter, which really sucks cause then you have to take that out to get to it, it happened to me and hopefully it doesn't happen to you.

Just make sure that when you get the gears where you want them that they stay there and don't move or slide out again. I put screws in the shaft that the gears go on to keep them from sliding again.

sorry I don't have pics to post for ya, but I'm layin in bed typing this shit on my phone. I know how you feel so I thought I would help ya otherwise I wouldn't be able to sleep.

hope it works out. if not just ask more questions.