P0453 - Evaporative Emissions Control System Pressure Sensor High Input
I cant seem to get rid of this code.
Things I tried. Replaced fuel cap - no good Replaced ftp sensor on evap canister - no good Replaced evap purge valve - no good Dont know what to do next. Already wasted 150$ on parts with no luck. Once I clear the code, it comes right back as soon as the car is started. |
A P0453 code may be caused by one or more of the following:
|
^yea ive read that list before.
was hoping that someone else had this code before and figured it out ordered a used evap canister on ebay to see it that cures it. |
bump
|
I'd like to know how this problem was solved, I'm having thesame problem with my TL
|
Any update on this?
|
:zombie:
|
Possible Solution
I got this same code on my 03 RSX Type s. I replaced the evap canister and the purge valve. I think it may be that the actual wires in the connector become damaged. Talking about the orange plug/connector that plugs into the evap canister. Will see what I can find.
|
Any Update in this Thread?
I am getting the same P0453 code on my 2007 RDX along with P2422, Replaced the FTP Sensor (yellow Circle), Purge valve is open (red Arrow), can plow air thru canister. I Haven't replaced the Fuel cap yet.
https://cimg5.ibsrv.net/gimg/acurazi...86e8110ff0.jpg |
All times are GMT -5. The time now is 11:00 AM. |
© 2024 MH Sub I, LLC dba Internet Brands