Rossv1's Progress Thread
#244
Moderator
iTrader: (3)
It never stops, like diarrhea.
#246
Moderator
iTrader: (3)
No, the other end.
#248
Moderator
iTrader: (3)
There ya go.
#250
Moderator
iTrader: (3)
Tell us!
#251
BANNED
iTrader: (33)
^what color?
#253
Moderator
iTrader: (3)
Austin will "assist" you with painting the calipers
#255
Moderator
iTrader: (3)
#257
Moderator
iTrader: (3)
I know what you did. Post pictures, now.
#259
Moderator
iTrader: (3)
Of the new color you bish
#261
Moderator
iTrader: (3)
Yum. CFA.
#263
Moderator
iTrader: (3)
fatty
#265
Moderator
iTrader: (3)
#266
Suzuka Master
Thread Starter
Fine Tyler, I'll give in and post pictures.
I decided to go with a BMW blue that was only available for a few years before it was discontinued.
The picture a little up the page is how they looked before; Silver with an oversized Red Brembo decal.
I went with a standard sized decal, 3 1/2 inches, at the suggestion of Rockstar and I'm glad I did.
For the painting process, I just sanded them down with 350 grit sandpaper, used acetone to wipe down the calipers, then I did 2 light coats of color followed by 4 thick coats of color, after I let the paint dry I put the decals on and then started with the clear coat; 2 light coats and 4 thick coats.
Well without further adieu, here are some bad pictures. The sun went down before I could get some in the light so I'll take some tomorrow too.
And here's a picture of the rear covers redone:
I decided to go with a BMW blue that was only available for a few years before it was discontinued.
The picture a little up the page is how they looked before; Silver with an oversized Red Brembo decal.
I went with a standard sized decal, 3 1/2 inches, at the suggestion of Rockstar and I'm glad I did.
For the painting process, I just sanded them down with 350 grit sandpaper, used acetone to wipe down the calipers, then I did 2 light coats of color followed by 4 thick coats of color, after I let the paint dry I put the decals on and then started with the clear coat; 2 light coats and 4 thick coats.
Well without further adieu, here are some bad pictures. The sun went down before I could get some in the light so I'll take some tomorrow too.
And here's a picture of the rear covers redone:
Last edited by rossv1; 02-09-2013 at 05:44 PM.
#267
Moderator
iTrader: (3)
SICK! Congrats dude
Why does it look like you have so much wheel gap with those springs?
Why does it look like you have so much wheel gap with those springs?
#269
Moderator
iTrader: (3)
schmaybe
#271
2014 Jeep SRT
Oh no, you painted the rivets on the rear covers! You could've taken them off with an Allen wrench before you painted them. Oh well, not a huge deal, they still look good.
#274
Moderator
iTrader: (3)
But what you DIDN'T do was remove that stupid pinstripe
So headlights and calipers?
So headlights and calipers?
#275
Suzuka Master
Thread Starter
Hell will freeze over before that pinstripe comes off. haha
You got part of it right. I got some carbon fiber vinyl and covered up the headlight reflectors with it. Other thing was I finally took off the front mud flaps.
You got part of it right. I got some carbon fiber vinyl and covered up the headlight reflectors with it. Other thing was I finally took off the front mud flaps.
#276
Moderator
iTrader: (3)
Ah you did! Very nice! Time for A-Spec side skirts to finish it off
#279
Moderator
iTrader: (3)
But my constant nagging since you got the car never convinced you!?!?!!?
sinep
sinep