NBP_BALLER NBP '07 TL Progress Thread
#121
Still a little confused on the lc7i. I have 19 wires run down the entire car from the amp to the rear. Was going to cut the harness after the factory amp and run all 4 speakers, sub and a remote so 11 wires back and then run 8 back to the factory harness and splice back into the harness where I cut off the other end going to the speakers, but just run my own sub wires since its so close. I may be way wrong on this but I haven't got too far with it yet. Rear speakers, rear shelf dynomatted, sub box, battery, amp kit and wires all run but that's all I've gotten so far. Limited time since I work full time and putting myself through college so the mods are a slow process. Gonna build a custom enclosure on the right of the trunk for the amp, think I may let a friend do it to save time. If you have any input from experience let me know man! I'm all ears
I mounted amp under driver seat,
Ran 4guage wire kit from batt to amp
pulled stock amp and installed Lc7i in that spot.
I cut wires at the amp for the feeds to lc7i.
Ran rca's from lc7ito the amp.
Ran new speaker wires from amp to the rear deck components.....easy to do.
Ran speaker wire from amp to the crossovers.....for the sub i ran back over to the stock amp location and went into the factor wire for the door. (didn't want to re wire and run wires thru doors and molex connecors)
For the tweets, ran new wire to them from the crossover
Ran new wire to the trunk for sub as well.
tweaked the Lc7i & amp for a bit...
10" jl audio HO box in trunk
Hope this helps,
#122
Dallas Chapter Leader (Midwest Region)
Thread Starter
#123
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
Damn, this is going to be good!
#124
Dallas Chapter Leader (Midwest Region)
Thread Starter
A lil sneak peak
Did every fluid flush and trans drain/refill
Then I set her on the ground!
Uh oh
Here's the second set of tails I used for donor parts, decided to modify them too... Will prob sell to a local
Still modding
Reds are close but not done yet
And the GRAND FINALE!!!!! MY TAILLIGHTS! AHHHHH
Did every fluid flush and trans drain/refill
Then I set her on the ground!
Uh oh
Here's the second set of tails I used for donor parts, decided to modify them too... Will prob sell to a local
Still modding
Reds are close but not done yet
And the GRAND FINALE!!!!! MY TAILLIGHTS! AHHHHH
#125
Race Director
iTrader: (8)
awesome update
The following users liked this post:
NBP_BALLER (10-06-2014)
#127
Dallas Chapter Leader (Midwest Region)
Thread Starter
It better sound like a million bucks. $3500 spent on this system so far and im nowhere near done. Had to get my taillights out of the way first because I had to take the box back out. Also building a custom amp enclosure on the right side opposite of the sub, putting it behind glass and illuminating it blue. A dark wood floor may happen as well. Not sure yet.
#128
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
Damn....hot!
#130
Dallas Chapter Leader (Midwest Region)
Thread Starter
#131
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
Nice looking tails.
#134
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
#137
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
who da fudge is this nukka haha
#139
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
well shit, our relation just got weird...and yours with you-know-who, just got weirderrr
#140
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
Sooooo..............where are the "galore" pictures??????
#141
Dallas Chapter Leader (Midwest Region)
Thread Starter
#142
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
I'll be over here.......waiting.
#143
Dallas Chapter Leader (Midwest Region)
Thread Starter
Sorry, been busy dealing with UPS, and a paypal claim. Seller of my wheels sent me boxes full of wood and no wheels. Pretty hacked, hopefully paypal will refund my $2000. Also moving into a house currently so ive been busy doing that this week. Ill have pic tho! Just give me a few lol
#144
Race Director
iTrader: (8)
Sorry to hear buddy!
Hope it all works out well
Hope it all works out well
#146
Dallas Chapter Leader (Midwest Region)
Thread Starter
Yep I ordered 4 Work VSXX 18x10+20 wheels that were refurbished and candy blue faces from www.wheelflip.com turns out I was scammed. Working 12 hour shifts and finished moving into a new house today so ive been busy. So no new wheels for the national meet
#147
Race Director
iTrader: (8)
you planning to warn others or nah?
I'll do it for you, happy unpacking buddy
Work VSXX 18x10 +20, 5x114.3 by Eric U. ? WheelFlip.com
lets warn others (hopefully Google bots run across this post when someone searches him)
DO NOT BUY FROM ERIC HUNGER
SHIPS OUT BOXES FULL OF WOOD
909-610-3082
Eric.hunger@yahoo.com
I'll do it for you, happy unpacking buddy
Work VSXX 18x10 +20, 5x114.3 by Eric U. ? WheelFlip.com
lets warn others (hopefully Google bots run across this post when someone searches him)
DO NOT BUY FROM ERIC HUNGER
SHIPS OUT BOXES FULL OF WOOD
909-610-3082
Eric.hunger@yahoo.com
Last edited by guitarplayer16; 06-04-2015 at 04:20 PM.
#148
Dallas Chapter Leader (Midwest Region)
Thread Starter
you planning to warn others or nah?
I'll do it for you, happy unpacking buddy
Work VSXX 18x10 +20, 5x114.3 by Eric U. ? WheelFlip.com
lets warn others (hopefully Google bots run across this post when someone searches him)
DO NOT BUY FROM ERIC HUNGER
SHIPS OUT BOXES FULL OF WOOD
909-610-3082
Eric.hunger@yahoo.com
I'll do it for you, happy unpacking buddy
Work VSXX 18x10 +20, 5x114.3 by Eric U. ? WheelFlip.com
lets warn others (hopefully Google bots run across this post when someone searches him)
DO NOT BUY FROM ERIC HUNGER
SHIPS OUT BOXES FULL OF WOOD
909-610-3082
Eric.hunger@yahoo.com
#149
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
Wow, I hope it gets resolved quickly.
#150
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
any luck Travis?
#151
Dallas Chapter Leader (Midwest Region)
Thread Starter
Me too... me too...
No not yet, I have to wait ten days for paypal to let him put in his about what happened (which I bet he wont because he is a fake) and then they decide the claim based on evidence.
No not yet, I have to wait ten days for paypal to let him put in his about what happened (which I bet he wont because he is a fake) and then they decide the claim based on evidence.
#153
J-series addict
iTrader: (4)
Dude wtf!!! Tell me you're BSing here? That's crazy man...
Don't worry, PayPal generally always backs up the buyer on purchases. Trust me, I've been the seller who had my funds taken before any foot work was done by Paypal but ended up getting my money back once I proved my side.
Seriously brother, this is nasty shit!
Don't worry, PayPal generally always backs up the buyer on purchases. Trust me, I've been the seller who had my funds taken before any foot work was done by Paypal but ended up getting my money back once I proved my side.
Seriously brother, this is nasty shit!
#154
Moderator
iTrader: (3)
Sorry to hear
#155
Dallas Chapter Leader (Midwest Region)
Thread Starter
Damn ... Some expensive wood... People these days do anything for money... Hopefully everything goes well on your end travis...
I probally won't be able to make it to the national Acurazine meet travis... I can't find anyone to replace my Friday... Just tell everyone I said hi
I probally won't be able to make it to the national Acurazine meet travis... I can't find anyone to replace my Friday... Just tell everyone I said hi
Dude wtf!!! Tell me you're BSing here? That's crazy man...
Don't worry, PayPal generally always backs up the buyer on purchases. Trust me, I've been the seller who had my funds taken before any foot work was done by Paypal but ended up getting my money back once I proved my side.
Seriously brother, this is nasty shit!
Don't worry, PayPal generally always backs up the buyer on purchases. Trust me, I've been the seller who had my funds taken before any foot work was done by Paypal but ended up getting my money back once I proved my side.
Seriously brother, this is nasty shit!
#156
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
Anion, I'm really sorry you can't come to the National Meet. We'll have a beer in your honor.
#157
Dallas Chapter Leader (Midwest Region)
Thread Starter
#158
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
.....maybe two!
#160
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
^^^ so he is An....whaddup dude!
Travis, bring your chick friend...the more the merrier
Travis, bring your chick friend...the more the merrier