Miyagi__'s Progress Thread
#241
Everyday I'm rofling
Sweet. I'm glad to see someone else who isn't scared to bake open their headlights themselves.
#242
Instructor
Thread Starter
It's been a year!
Hi people of acurazine. I haven't been on in over a year due to school, work, and disinterest. Which was why I stopped updating. I'm still lurking though spying on other people's builds and such. In the course of the year though, I've been getting a few parts here and there. Here's a list:
-3 piece SPC rear camber arms
-BC coilovers w/ swift upgrade 24k/14k
-Megan racing upper control arms (no hard knocks on our strut tower when slammed unlike the ingalls or spc ball joint!)
-Sold AG M550 wheels and bought AG M590 wheels! Just got them installed today and i'll be updating here first.
-Spirior tail lights
-Roof gloss black 3m vinyl
-Lower grille gloss black 3m vinyl
-2012 Honda grille
-rolled and pulled front fenders a bit more
That's really about it from the top of my head... If i have some more, i'll continue to update you guys.
Enjoy these for now!
-3 piece SPC rear camber arms
-BC coilovers w/ swift upgrade 24k/14k
-Megan racing upper control arms (no hard knocks on our strut tower when slammed unlike the ingalls or spc ball joint!)
-Sold AG M550 wheels and bought AG M590 wheels! Just got them installed today and i'll be updating here first.
-Spirior tail lights
-Roof gloss black 3m vinyl
-Lower grille gloss black 3m vinyl
-2012 Honda grille
-rolled and pulled front fenders a bit more
That's really about it from the top of my head... If i have some more, i'll continue to update you guys.
Enjoy these for now!
#243
VTEC just kicked in, yo!
damn.. car looks great. Your come-back post has more parts than my entire build thread Hope you decide to stay and continue updating us I wanna see more pics!
Last edited by xtcnrice; 10-25-2014 at 10:13 AM.
#244
TSX AMG Type //M i-VVT
Oh pretty sure i saw your car on IG with the new wheels and tail lights
#245
Instructor
Thread Starter
Oh pretty sure i saw your car on IG with the new wheels and tail lights
#246
Instructor
Thread Starter
Here is a pic for now. Slightly tucking rims in the rears by literally about a mm. Wish I could get more low but the fronts won't allow me to because of turning radius... Scared of front bacon fenders. I may try and keep pulling the fronts. I don't know yet. I'll get more pics soon. (:
#249
Everyday I'm rofling
Completely my opinion but if you aren't going to lower the front anymore, then you should raise the rear a little bit. It has that saggy pants look to it right now.
#250
Unregistered Member
^ if you look at the skirts, they're parallel with the ground = looks awesome.
#251
Everyday I'm rofling
Even if it is parallel to the ground the tires still have different amounts of tuck which is what's causing the saggy look to my eyes.
#252
Instructor
Thread Starter
19x9.5 +15 all around. Color is brushed antique bronze with metallic black cherry center caps.
Hahah yeah it does look funny a bit, but as of now it's what I can roll with without making the front fenders look so ugly and wide compared to the rears. Still deciding whether or not to pull the front fenders. \:
I would raise it... BUT I WANNA BE LOWER MAN. lol.
I would raise it... BUT I WANNA BE LOWER MAN. lol.
Last edited by Miyagi__; 10-28-2014 at 08:16 PM.
#253
Instructor
Thread Starter
I recently got more into editing photos. Looked up some pretty cool tutorials haha. Unfortunately, this is at night so I couldn't really get what I wanted. Plus I only took one... Here's an okayyyyy picture.
#258
Instructor
Thread Starter
For these wheel sizes, I went with 245/35 since it had the minimum load rating for our cars. I would stretch more like you but I didn't want to risk any potholes ruining my wheels.
The following users liked this post:
iSeeYouTwo (10-29-2014)
#259
Drifting
Join Date: Jun 2012
Location: City of Champs, MA
Age: 32
Posts: 2,969
Received 657 Likes
on
478 Posts
Thanks man! But yeah like xtcnrice said, it's practically impossible to fit these at this height unless you want bacon served everyday. (; I bought the Megan Racing UCAs and ran about -3 camber to be able to turn.
For these wheel sizes, I went with 245/35 since it had the minimum load rating for our cars. I would stretch more like you but I didn't want to risk any potholes ruining my wheels.
For these wheel sizes, I went with 245/35 since it had the minimum load rating for our cars. I would stretch more like you but I didn't want to risk any potholes ruining my wheels.
#260
Instructor
Thread Starter
Thanks for that info sir. I purchased the wheels with these tires already installed, so I didn't really have a choice when it came to tire size, lol. 2 are practically brand new and the other 2 need replacing, that's why I asked.. idk if staggered tires are safe though?
The following users liked this post:
Miyagi__ (11-04-2014)
#262
Instructor
Thread Starter
lol sweet. brightened up my shadows a bit. :P here's a quicker edit i just did. Before and after. Running -7 camber in the rear. gonna go max camber in the rear because its just not satisfying me at this point.... /:
tehwhip by freshtee00, on Flickr
tehwhip by freshtee00, on Flickr
#263
Instructor
Thread Starter
The following users liked this post:
iSeeYouTwo (11-06-2014)
#264
VTEC just kicked in, yo!
not a fan of huge negative camber, but damn that tuck looks pretty amazing. What's not satisfying you exactly? hahah
man.. I need those tail lights! how much did they cost you, and from where?
man.. I need those tail lights! how much did they cost you, and from where?
#265
Instructor
Thread Starter
I got these tails from Oleg Sultan from Russia. Instagram is @hpt_ua. Really chill guy. I bought them for about $550 i think.. Can't quite remember but around that price range.
The following users liked this post:
xtcnrice (11-05-2014)
#266
Drifting
Join Date: Jun 2012
Location: City of Champs, MA
Age: 32
Posts: 2,969
Received 657 Likes
on
478 Posts
haha thanks. Just the stance itself isn't very satisfying. The body doesn't seem low enough, but I think it's because our engine hangs pretty low. I want to go a little bit lower and emphasize the tucking. And more negative camber for the hell of it.
I got these tails from Oleg Sultan from Russia. Instagram is @hpt_ua. Really chill guy. I bought them for about $550 i think.. Can't quite remember but around that price range.
I got these tails from Oleg Sultan from Russia. Instagram is @hpt_ua. Really chill guy. I bought them for about $550 i think.. Can't quite remember but around that price range.
#267
Instructor
Thread Starter
Thread
Thread Starter
Forum
Replies
Last Post
MrHeeltoe
1G TSX Tires, Wheels, & Suspension
20
02-23-2023 01:54 PM
MrHeeltoe
2G TSX Tires, Wheels & Suspension
3
09-29-2015 10:43 PM
MrHeeltoe
3G TL Tires, Wheels & Suspension
0
09-28-2015 05:43 PM