TSXer1

Im installing a sealed box with 2 12" subs and amp in my 05 TSX auto. I want to run it from the factory radio assy. Can anyone give me some tips and advice on how to do a quick clean and easy install and tell me what all materials I will need.

Districk81

Damn no responses... Does anyone one have any information b/c im trying to do the same thing and need to know the best way and what all I'll need

brad757

Ive looked into that a little bit you need to go to the audio store and get a hi/ low converter because the amp needs to have the signal. The wires going to the speakers contain the signal along with power in order to work the speakers. So you need to run the speaker wires through the hi low converter and then run the left and right RCA's coming out of the converter to the amp. Only thing is the rear deck speakers in the TSX already have a pre amp so I would look into that a bit more but I think you should be ok. The converters are pretty inexpensive too!

hypocalypto

I picked up a sound processor from crutch field which did the trick. I only used a mono amp with a sub though