Hi. Use the largest piece possible since you will need a good grip to pull and stretch. Remove grill is a must then it has to separated into its 4 parts. 2 big silver parts the grill and emblem. Start by top of the emblem. I did it in the sun on a scorching hot day using a heat gun. The vinyl will stretch insane amounts. Soapy water helps between vinyl and grill to help slide and stretch. It wasnt easy for me since i had no wrapping experience. But heat and stretch is all it takes. Then just tuck and trim the leftover vinyl. You might get air and water bubbles around the small curves around the emblem. I popped them with a sewing needle and heat gun and press to squeeze out air n water. Hope this helps.
Whatever you do dont cut to size. Too many curves to stretch around.