There is a neuspeed strut bar on BM right now if you're interested. I remember you commenting about mine so I thought I would give you a heads up.
https://acurazine.com/forums/car-parts-sale-361/99-02-neuspeed-front-strut-bar-829140/

Yeah I figure I'll let them go if you want them. Need money to rebuild my supercharger! Lmk when and where.

No problem, I believe the car had 79k on it but they weren't original obviously so it's really hard to say. Still debating on letting them go but let me know when you are ready to buy and we'll see.

It's wrapped in 3m vinyl. Either di-noc or the scottsbrite will work...

sorry for the late reply just got back from vacation hid fogs were very simple to install you do need to remove the bumper no special tools required. just pop the bumper clips off with a screw driver located top and bottom of bumper and on the side of the bumper theres a few bolts that need to be taken out i believe are 10 mm

sorry, but i'm not parting out my car, just the aftermarket parts.

Yes I do. What did you want done?

i think its a standard 5mm LED. i dont know what number the bulb is since i got mine from my friend who had a bunch of raw LEDs in his shop. he just soldered a resistor to the LED and wrapped it in electrical tape. then we just shoved it in the socket and it worked. im sure you could buy one readymade but again i dont know what number they are.

hey just saw your comments on my pictures. first off, here is link to my LED shift gate thread: https://acurazine.com/forums/2g-tl-photograph-gallery-99/custom-led-shift-gate-762908/
as far as getting to the actual shift plate thing, there are threads on how to do that already. i just used a very thin flathead screwdriver and pried everything off. you can wrap the flathead in tape so it does less damage.

second, here is a link to a bulb application guide: https://acurazine.com/forums/2g-tl-1999-2003-98/bulb-application-614883/
the bulbs that you commented on the are the dome light-DE3175 and the door courtesy lights-168/194. i got a friend to make me the LEDs from scratch but you can go to pep boys and find them there, although they are on the expensive side. or when you figure out which bulbs you need you could go on ebay, v-leds.com, or superbrightleds.com.

third, you asked about bumper removal to get to the resonator. i didnt remove my bumper. although you totally could and it would make it easier to remove it. but i dont know how. i followed the first part of this CAI DIY: http://wizardsworks.org/chod/acura/cai/printme.html
it took me a while cus i didnt have the proper tools but overall its very easy to do.

hope this helps!

hey i just bought led strips to use for footwell lighting and wanted to wire them to the instrument panel [to come on with headlights] i know you used 18 gauge wire but this is my first mod..so i attach 18 gauge wire to both the + and - of the led strip, stick one into the fuse and other to the ground and thats it?