Oh Sickest TL's '06 Royal Blue Pearl
08-24-2016, 10:06 AM
#1601
Senior Moderator
Originally Posted by cu2wagon
Basically. It throws as much light ahead of you as possible. The lower cut on the left is so you don't blind oncoming traffic while the higher bit on the right illuminates the side of the road and signage.
The cutoff profiles are swapped for LHD countries.
The cutoff profiles are swapped for LHD countries.
The following users liked this post:
cu2wagon (08-24-2016)
08-24-2016, 10:11 AM
#1602
Jeff
Thread Starter
iTrader: (3)
Join Date: Jul 2014
Location: Port City, New Brunswick Canada
Posts: 5,728
Received 815 Likes
on
726 Posts
in other news, mocked up that STI front lip. Doesn't seem like its going to be fun at all. the bending required for it to fit around the a-spec lip seems like a lot of work but we will see how it turns out. Going to wait until my buddy gets his hoist up (soon) cuz we dont feel like rolling around on the ground and with the car lowered its a bit cramped under there
Last edited by Steven Bell; 08-24-2016 at 08:27 PM. Reason: Merged Posts-please use the Multi-Quote button (the middle icon) in the lower right hand side of each post.
08-24-2016, 10:26 AM
#1603
Senior Moderator
Just leave the headlights on over night 
what can go wrong 
what can go wrong
08-24-2016, 10:29 AM
#1605
Senior Moderator
Originally Posted by Oh Sickest TL
already did it but for some reason my car wouldnt start the next day 
08-27-2016, 10:05 AM
#1607
Cutoff is looking good. I still need to adjust mine as well
still not sure how I feel about the lip. Ive only seen a couple cars that really looked good with them, and they required cutting and lots of molding. Interested to see the results
still not sure how I feel about the lip. Ive only seen a couple cars that really looked good with them, and they required cutting and lots of molding. Interested to see the results
The following users liked this post:
Oh Sickest TL (08-30-2016)
08-27-2016, 03:44 PM
#1608
Jeff
Thread Starter
iTrader: (3)
Join Date: Jul 2014
Location: Port City, New Brunswick Canada
Posts: 5,728
Received 815 Likes
on
726 Posts
no lip yet....Would like to get these wheels flushed out a bit more but I like my height and I dont want to go any higher to accomadate a spacer nor do I want to roll fenders
08-27-2016, 04:57 PM
#1610
Moderator
iTrader: (3)
She so purrrrdy.
The following users liked this post:
Oh Sickest TL (08-27-2016)
08-27-2016, 05:55 PM
#1611
Moderator
Join Date: Aug 2014
Location: Dirty H-Town, Amerikkka
Posts: 28,432
Received 7,772 Likes
on
5,045 Posts
hola amigo!
The following users liked this post:
Oh Sickest TL (08-27-2016)
08-29-2016, 10:20 PM
#1614
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
Wow, lots of reflection in that finish!
The following users liked this post:
Oh Sickest TL (08-30-2016)
08-30-2016, 06:01 AM
#1615
Senior Moderator
Originally Posted by rockstar143
Super pretty!
Originally Posted by CLtotheTL32
She so purrrrdy.
?????
NO!
08-31-2016, 02:31 PM
#1619
Drifting
yeah you oughta...that was J's point
08-31-2016, 03:32 PM
#1621
Moderator
Join Date: Aug 2014
Location: Dirty H-Town, Amerikkka
Posts: 28,432
Received 7,772 Likes
on
5,045 Posts
08-31-2016, 03:57 PM
#1622
Senior Moderator
The following users liked this post:
Oh Sickest TL (09-07-2016)
09-07-2016, 08:10 PM
#1625
Jeff
Thread Starter
iTrader: (3)
Join Date: Jul 2014
Location: Port City, New Brunswick Canada
Posts: 5,728
Received 815 Likes
on
726 Posts
so found a good local guy who rolls fenders.. he's done all the guys cars around here with great success and they all said he's done great work so I'm going to get it done!
Gonna go see him next week and let him see my car
Gonna go see him next week and let him see my car
09-07-2016, 09:13 PM
#1626
Moderator
Join Date: Aug 2014
Location: Dirty H-Town, Amerikkka
Posts: 28,432
Received 7,772 Likes
on
5,045 Posts
Let him see your car, eh?
I bet he'll think it's a nice car.
It is a pretty blue.
Do you think he'll like it?
☐ Yes
☐ No
If he likes it, do you think maybe sorta anyway you'll go steady with him?
☐ Yes
☐ No
Do you wanna have him take things to the next level and get them fendas rolled?
☐ Yes
☐ No
teeheehee. :gheyfight:
I bet he'll think it's a nice car.
It is a pretty blue.
Do you think he'll like it?
☐ Yes
☐ No
If he likes it, do you think maybe sorta anyway you'll go steady with him?
☐ Yes
☐ No
Do you wanna have him take things to the next level and get them fendas rolled?
☐ Yes
☐ No
teeheehee. :gheyfight:
The following 2 users liked this post by cu2wagon:
Oh Sickest TL (09-07-2016),
rockstar143 (09-08-2016)
09-08-2016, 11:26 AM
#1630
Don't leave it to chance...
roll your fenders, take your measurements...
there are too many factors to have us decide for you.
Oddly the Advan wouldn't rub with a 225 at 29MM offset and 9" wide...but my 8.5" aspec with anything over a 15 and 235 would...
Lots of angles and variables...
roll your fenders, take your measurements...
there are too many factors to have us decide for you.
Oddly the Advan wouldn't rub with a 225 at 29MM offset and 9" wide...but my 8.5" aspec with anything over a 15 and 235 would...
Lots of angles and variables...
09-08-2016, 11:29 AM
#1631
Jeff
Thread Starter
iTrader: (3)
Join Date: Jul 2014
Location: Port City, New Brunswick Canada
Posts: 5,728
Received 815 Likes
on
726 Posts
thats weird .. but didnt you have 235s on your advans for blue?
FWIW, I have all the camber kits front and rear so I got that going for me.. I got you though.. roll fenders first and see whats there for real estate!
essentially if I ran 15mm all the way around id basically have the identical setup as blue.. but Im lower than blue it looks like
FWIW, I have all the camber kits front and rear so I got that going for me.. I got you though.. roll fenders first and see whats there for real estate!
essentially if I ran 15mm all the way around id basically have the identical setup as blue.. but Im lower than blue it looks like
Last edited by Oh Sickest TL; 09-08-2016 at 11:40 AM.
09-09-2016, 09:45 AM
#1632
Jeff
Thread Starter
iTrader: (3)
Join Date: Jul 2014
Location: Port City, New Brunswick Canada
Posts: 5,728
Received 815 Likes
on
726 Posts
Don't leave it to chance...
roll your fenders, take your measurements...
there are too many factors to have us decide for you.
Oddly the Advan wouldn't rub with a 225 at 29MM offset and 9" wide...but my 8.5" aspec with anything over a 15 and 235 would...
Lots of angles and variables...
roll your fenders, take your measurements...
there are too many factors to have us decide for you.
Oddly the Advan wouldn't rub with a 225 at 29MM offset and 9" wide...but my 8.5" aspec with anything over a 15 and 235 would...
Lots of angles and variables...
We will take measurements after and see what we are working with, I want to squeeze as much as I can out of this setup. Might not get to spacers and shit until next season but at least ill be rolled and ready to rock for next season
09-09-2016, 09:52 AM
#1633
Safety Car
iTrader: (5)
man i can't believe your car is going back in soon, i feel like you just took it out! that would kill me, i can't go a few days without some spirited driving in my TL!
glad to hear you're going rolled, it's really not that big of a deal even though i think you said you had some past "repair" issues in those areas. skip spacers, buy j's set, and sell your current set haha
glad to hear you're going rolled, it's really not that big of a deal even though i think you said you had some past "repair" issues in those areas. skip spacers, buy j's set, and sell your current set haha
09-09-2016, 10:01 AM
#1634
Jeff
Thread Starter
iTrader: (3)
Join Date: Jul 2014
Location: Port City, New Brunswick Canada
Posts: 5,728
Received 815 Likes
on
726 Posts
I wish I had some upfront money to buy j's set but I can't afford to sit on mine and wait for them to sell. Ill likely get mine refinished in a similar style to his, I love that dual machined lip!
Yea man she's going away mid-late october. It already getting shitty here with lots of rain and fog.. Tell me about man, I barely drove the thing this year! Like 5000 kilometres tops LOL!
On another note, I think my interview went great today.. Yes I know Oil and gas industry is dying but hey its a job right now and a fairly good one. so
Yea man she's going away mid-late october. It already getting shitty here with lots of rain and fog.. Tell me about man, I barely drove the thing this year! Like 5000 kilometres tops LOL!
On another note, I think my interview went great today.. Yes I know Oil and gas industry is dying but hey its a job right now and a fairly good one. so
Last edited by Oh Sickest TL; 09-09-2016 at 10:13 AM.
The following users liked this post:
Oh Sickest TL (09-09-2016)
09-09-2016, 10:10 AM
#1636
Moderator
Join Date: Aug 2014
Location: Dirty H-Town, Amerikkka
Posts: 28,432
Received 7,772 Likes
on
5,045 Posts
Did you wear the suit?
The following users liked this post:
cu2wagon (09-09-2016)
09-09-2016, 10:14 AM
#1638
Senior Moderator
congrats jefford
The following users liked this post:
Oh Sickest TL (09-09-2016)
09-09-2016, 10:18 AM
#1640
Senior Moderator