savclaude

J power rear camber kit
ultra racing rear sway bars and front strut bar
no fender roll yet
2'' drop all around on BC Racing

VortexBlueTSX

Pictures - please at minimum provide a level, side view shot in good lighting showing the drop clearly
1. Have Tein Basics Coilovers
2. Drop is about 1.5-2 inches...not to sure
3. Have a Full Rear camber Kit (3-piece) and Adjustable in the front
4. Slight camber in the front... -.5 maybe a little more, and around -2 in the rear
5. Have all the fenders Rolled
6. Running 19x10.5 (All around) with 245/35

These coils are awesome, would recommend to anyone! Very comfortable, and my car with this and the Sway Bar from Progress handles like its on rails

TommyXM

Type of lowering set up - TEIN STREET FLEX
Estimated drop amount relative to stock. 1.5" lower than stock in both

WORK DD5.2
F +35 9J 235/35/19
R +30 10J 235/35/19 camber -2.3

Dunlop DZ101, noisy but really economic.

amarranjha

finally someone on the same tire size as im trying to get. quick question.. how is your ride?? im looking to put 225/30/20 also. any problems with damage to your fenders or touching? plz lmk thx

iSeeYouTwo

Good luck getting a response from that guy. Last time I heard from him he was trying to race OP with his Toyota Truck.

WiggsNuke

I'm a huge fan of H&R's, but the Koni yellows look like they put a great drop on them. I'm over being slammed after ripping the muffler off my accord haha

stan_t

What do you mean? KONI yellows are stock length, if you are talking about H&R springs the height will be same as with OEM shocks.

Stan

Puppetmaster

What he said. Unless you use the lower perches on the Konis, the H&R drop will be the same with the Konis or OEMs.

smashn.kev

http://instagram.com/p/a-Vt1ML6X6/

my 09 tsx 19x10 linea corse wheels 235/35/19 tein coilovers maxed out

iSeeYouTwo

Please don't link pictures from instagram, as most of us don't even have one.

Upload your image to a photo hosting website like www.imgur.com and post the [IMG][/IMG] code here.

MC MiYoung3269

There.....

savclaude

^^ nice stance

iSeeYouTwo

Looks clean but terribru picture

chaqui74

K-Sport Coilover,J-Power rear 6piece adjustable control arms,Rear Fender Roll,Front Coilover fully adjusted to the lowest setting (unknown " of drop) Rear can still go down some more (unknown " of drop), Front and Rear camber (unknown) Vossen Wheels VVS-CV4 20x10.5 +45/40 Front and Rear Tire size 255/30/20.

khmerkush

Megan EZ streets, Cheap MSR 18x8 +35 215/40/18

Adam Rutledge

09 TSX w/ tech pkg in Premium White pearl.
1. Have H&R sport lowering springs
2. Drop is about 1.25"
3. Camber adjustments Front left -0.3 Front right -0.7 Rear left -2.5, rear right -2.7 .
4. No fenders mods
5. Honda Factory Performance Wheels 19"
6. Hancook Ventus Evo V12 summer tires (245/40)

These springs have OEM quality ride and there is no rubbing. Would highly recommend.

nmssr08

That looks awesome! So clean...

doh!

-megan ez street coilovers and they ride great!!
-volk te37 19x8.5 19x9.5 +43
-235-35 245-35
-no fender mods required, no rubbing whatsoever even on full turns

odus

iTrader: (1)

^^^ cant see that pic

doh!

Sorry deleted by accident...fixed!!
[img]http://farm4.staticflickr.com/3785/9...f92118a2_b.jpg[/img]

Puppetmaster

The "IMG" tags are correct but remove the "URL" in the brackets. Looks pretty good.

Nick tsx

where have you buy your grille??

illest12tsx

D2 coilovers unsure of the drop rears are maxed front have some play no camber kit and stock wheels looking to get rims this month 19x8.5 and 19x9.5 or 19x10 with a high offset and stretched tire tring not to roll my fenders

jonnys_honda

I posted in the general section but thought I'd drop a few (phone) pics here.
2010 TSX on Megan EZ-Street Coilovers.
Wheels are XXR 527's 18x8.75 wrapped with 225/45/18 Kuhmo Ecsta SPT
I could continue slamming it but winter is around the corner.

Puppetmaster

I started this thread but never posted any pictures of my own car, so here's an old one. I would take some new pics but the car is dirty and winter is almost here, so the rims are coming off soon.

http://www.flickr.com/photos/7129234@N02/9715399903/

1. Eibach Pro Kit springs with Koni Sports (Yellow)
2. Estimated drop amount relative to stock: approx 1.5" lower than stock in front and 1.0" lower than stock in the rear. The Eibachs are a 1.0" drop all around but the Konis have two spring perch positions, and I'm using the lower up front and the normal perch for the rear, hence a 0.5" difference.
3. Height from ground to fender: not measured
4. No camber kit, front is around -0.8 and rear is around -3.0
5. Rear fenders are rolled, passenger side was rubbing a lot because of the wheel and tire specs
6. Rims are Volk CE28N in 18x8.5 +30 ET, tires are Conti ExtremeContact DW in 245/40/18
7. Ongoing notes will be in this thread: https://acurazine.com/forums/2g-tsx-tires-wheels-suspension-300/notes-koni-eibach-diy-install-890160/

Cu2Suspect

Lowered on Tein Flex Coilovers.... No camber kit... Stock wheels
Not sure how low I am can only fit about one finger in the gap lol

VR1

Every time I look at this thread, then at my car I get depressed.

nmssr08

1. Function and Form Type 1 coilovers (unknown of drop but it can go much lower)
2. no camber adjustments. Natural camber
3. all 4 fenders rolled. Rear bumper tabs cut and front fenders are slightly pulled
4. Wheels F: 19x9 +30 235/35R19 , R: 19x10 +30 245/35R19

I think I could of gone with 225/35R19 in the front to have the similar stretch as the rear. The fender still rubs in the front when I turn the wheel and go up the driveway. I'm going to go for airbag setup in the near future to avoid this issue.

opboarding

No camber kit with being that low? That's kind of scary. You're going to get some toe mixed in there too on the rear. Unless you've already gotten an alignment and there wasn't enough to matter.

davidtnly

megan ez street
natural everything
stock
half inch/1 and half inch without settling yet

dio07TL-S

Man... I wanted to get these wheels for my TL-S. It got totaled like 4 days before Christmas But... now, I've got a sexy TSX with a MT. It' light blue though... not my first choice, but it is growing on me. One question... I asking a few vendors about those Gnosis wheels and they said like a 2 month wait. Did you have a long wait? Any suggested vendor? Thanks in advance!

nmssr08

I also waited couple of months as well. I wanted to choose my own custom size and offset so work wheels had to make it from scratch. Its worth the wait though. I would suggest Speed Alliance in San Diego CA. They have the best customer service and very fair price. Talk to Jay, tell him Taka sent you and he will help you out. 1-866-549-8378

I only trust certain people with my hard earned money and Speed Alliance is once of them. Let me know if you have any questions

c0mikal

tanabe lowering springs
18 x 8.5 +35 off
225/35/18

doh!

Wheels were for sale but decided to use them instead.
-AME WX
-19x9 all around +40f +30r
-225-35f 235-35r
-rear quarters shaved off
-rear spc camber kit

Mild drop, just barely tucking top of the tire, but planning to go on air soon.

T-jay

Tein basics
a 1/4" from lowest setting front and back
Vossens 20x9 +35 front 20x10.5 rear +45
225/35/20 front 255/30/20 rear
No camber kit
Rolled and slightly pulled only cause i bought the roller!



Havent really contributed to the site in a while. thought this would be helpful to somebody.

808CU2

Perfect..!

808CU2

Seems like 19's is the way to go for nice fitment on the TSX huh..!

alfred.lai

Nice Mugen Bumper! Could you tell me where did you get it from?

dallison

Nothing special, just 17" a-specs

AcuraRolling

Megan EZ street
unknown drop, will be lower eventually
Weds Kranze Bazreia 19x10 +5 front, 19x11 +12 rear
225/35/19 and 245/35/19
ingalls front and rear adjustable ball joints max negative camber
front fenders: cut, rolled and pulled 13mm
rear fenders: roll, and pulled 5mm