waaasobe's build/ progress
The following users liked this post:
waaasobe (05-13-2014)
#82
Racer
Thread Starter
the license plate at the front like it was ruins the entire look of the car it was the only logical step lol. thanks man, you car is gorgeous, I'm gunna need to save to get that sport bumper you just picked up how much did that set you back ?
#83
Three Wheelin'
Good stuff man, looks great! Glad y'all finally got some sun hahaha.
The following users liked this post:
xtcnrice (05-13-2014)
#84
Racer
Thread Starter
#85
Racer
Thread Starter
hey guys its been a while, so a little while ago i bought some swichbacks from ijdm toy and after 2 weeks of me having them one of them burnt out. i called ijdmtoy in the hope that they would be reasonable and replace the product but their customer service is absolutely horrible so i told them i never wanted to deal with them again and went with vled switchbacks.
heres the difference between the ijdmtoy light and the vled
the light on the passenger side is the ijdm unit and the left is the vled. the vled is crazy bright at night i love it!
i also put leds in for my fog lights, my buddy gave these to me for free and their not to bad. they're only there for show so I'm quite pleased.
heres the difference between the ijdmtoy light and the vled
the light on the passenger side is the ijdm unit and the left is the vled. the vled is crazy bright at night i love it!
i also put leds in for my fog lights, my buddy gave these to me for free and their not to bad. they're only there for show so I'm quite pleased.
Last edited by waaasobe; 07-01-2014 at 09:59 AM.
#86
How about a video of the switchbacks in use at night, been thinking about getting the vled ones also and did you have to take he headlight out to put them in ? I hope not I just had them out to put Osram cool blue intense bulbs in
The following users liked this post:
waaasobe (07-19-2014)
The following users liked this post:
waaasobe (07-19-2014)
#89
Racer
Thread Starter
ill get a video for you tomorrow some time. no i just went through the fender. take off that one screw on the fender line thats mid way up and push the fender liner back then, shove your hand up there. the passenger side is a bit of a bitch though, because its so tight with the washer fluid reservoir there.
Last edited by waaasobe; 07-19-2014 at 10:17 PM.
The following users liked this post:
UTAH TSX (11-26-2014)
The following users liked this post:
waaasobe (07-20-2014)
#91
Instructor
Hey bud, did you end up getting the load resistors to get rid of the hyper flash?
I did it the pain of the ass way and took of my bumper both times, but first time was to bake my headlights to remove the reflector and install the switchbacks.
Second time was after I got the load resistors as I couldn't take the hyperflash anymore. Highly recommend to get the resistors and the bulbs together.
Let me know the next time there's a meet going on.
I did it the pain of the ass way and took of my bumper both times, but first time was to bake my headlights to remove the reflector and install the switchbacks.
Second time was after I got the load resistors as I couldn't take the hyperflash anymore. Highly recommend to get the resistors and the bulbs together.
Let me know the next time there's a meet going on.
#92
Racer
Thread Starter
Hey bud, did you end up getting the load resistors to get rid of the hyper flash?
I did it the pain of the ass way and took of my bumper both times, but first time was to bake my headlights to remove the reflector and install the switchbacks.
Second time was after I got the load resistors as I couldn't take the hyperflash anymore. Highly recommend to get the resistors and the bulbs together.
Let me know the next time there's a meet going on.
I did it the pain of the ass way and took of my bumper both times, but first time was to bake my headlights to remove the reflector and install the switchbacks.
Second time was after I got the load resistors as I couldn't take the hyperflash anymore. Highly recommend to get the resistors and the bulbs together.
Let me know the next time there's a meet going on.
man i totally forgot i have your number i have been to a few meets this week. we have a whatsapp group that we plan everything on. it gets a little physical at times but its a great place to get to know some of the guys and make it out to meets. message abrieluno on azine if you would like to join. but ill deff try and keep you posted for the next one!
#93
ROTAREDOM
I made a DIY for the resistors!
Follow my easy guide and youll be good to go!
Follow my easy guide and youll be good to go!
The following users liked this post:
waaasobe (07-22-2014)
#94
Racer
Thread Starter
its been a long while since i actually posted anything so here we go !
i got vleds for my fogs and they are absolutely next level. you have to spend the cash but you get a fantastic product.
annddd this happened today :'( for those of you who are interested my room mate backed up into my car... the hood is dented at the edge and i have a nice hole in my bumper. so can anyone say modulo front and repainted hood?
i got vleds for my fogs and they are absolutely next level. you have to spend the cash but you get a fantastic product.
annddd this happened today :'( for those of you who are interested my room mate backed up into my car... the hood is dented at the edge and i have a nice hole in my bumper. so can anyone say modulo front and repainted hood?
#95
VTEC just kicked in, yo!
I actually like the 09-10 Type S front lip look on a dark coloured car.. it looks aggressive yet clean imo. but eh, can't go wrong with modulo
you coming to the meet this sunday?
you coming to the meet this sunday?
#96
Racer
Thread Starter
I'm going to try to. i have a pretty busy weekend ahead of me. are you coming out ?
#97
VTEC just kicked in, yo!
yeah gonna try as well. I'm east end though.. so if I do show up at Sq1 and there's a cruise west, I likely won't be part of it. I'm pretty busy too.. just have a small window Sunday afternoon. I've only seen the crew like twice haha.. it'll likely be the last meet of the year.
#103
Nice modulo I was surprised how much it changed the front of my car you will love it
#104
Racer
Thread Starter
#105
ROTAREDOM
Do any of the clips/fog light covers, mesh for the lower part of the bumper come with?
#106
#107
Racer
Thread Starter
sent it again let me know if you get it !
Last edited by waaasobe; 11-27-2014 at 05:07 PM.
#108
Got the switch back bulb video thanks , do you think it would look stupid without clearing the headlights ?
#109
VTEC just kicked in, yo!
Not stupid looking imo, but not worth the money/effort. By default they will be white, so with the amber reflectors on it'll look like a lighter amber than you're used to now. When you signal they should "switch" to amber, and with the amber reflectors on, it'll likely be similar to what you're used to now, but just brighter. So, light-amber to amber... I might as well just stay stock until you clear the headlights. This is just my opinion, though.
Last edited by xtcnrice; 11-28-2014 at 08:36 AM.
#110
TSX AMG Type //M i-VVT
Yeah i think it'll look dumb unless you clear it.
The following users liked this post:
ssjoeboe9 (12-03-2014)
#111
Not to sure about baking my headlights
#113
Racer
Thread Starter
i don't think it would look stupid but, it wouldn't look right. i feel your apprehensiveness towards baking your headlights hence why i didn't do mine. i bought mine off eBay and so far they are mint so, thats an option if you want cleared headlights. if you're interested i believe the sellers name is fishcake321, i payed roughly 400$ for the pair which is a fantastic deal because, most other headlight sets are in the 1000$ range. but, if you feel absolutely compelled we have a guy up here that does a pretty good job clearing headlights. he's story05 on the forum and his ig is storycustomz.
Last edited by waaasobe; 12-03-2014 at 02:44 PM.
The following users liked this post:
xtcnrice (12-03-2014)
#114
ROTAREDOM
The following 5 users liked this post by ssjoeboe9:
Harper (12-12-2014),
iCrap (12-03-2014),
opboarding (12-03-2014),
waaasobe (12-03-2014),
xtcnrice (12-03-2014)
#115
TSX AMG Type //M i-VVT
that trans is a ticking time bomb lmao.
#116
Everyday I'm rofling
Baking my headlights was one of the first things I did to my car, and I've never modded a car before this. Just add some extra silicone to the perimeter of the lights and they'll seal back up no problem.
#117
Racer
Thread Starter
those gentlemen are all facts lol but, luckily utah seems to be a bit of a mechanical stig i think he'll be alright lol
wrenching around and mucking about in that respect seems perfectly normal to me. but, baking headlights just sets off sirens in my head i don't know why. also i think i would get murdered if i ruined our new stove lol
wrenching around and mucking about in that respect seems perfectly normal to me. but, baking headlights just sets off sirens in my head i don't know why. also i think i would get murdered if i ruined our new stove lol
The following users liked this post:
xtcnrice (12-03-2014)
#118
Race Director
iTrader: (8)
Modulo
The following users liked this post:
waaasobe (12-16-2014)
#119
Racer
Thread Starter
happy new year gentlemen !
so i tried to adjust by ebrake the other day and the jam nut just wouldn't move so i decided to take a few things out to see if there was anything holding it up. so far my efforts were futile. any help guys ?
but all is well because santa dropped by to cheer me right up ! huge thanks to konstantinos for telling me about the eBay seller for these, i saved 200$!
so i tried to adjust by ebrake the other day and the jam nut just wouldn't move so i decided to take a few things out to see if there was anything holding it up. so far my efforts were futile. any help guys ?
but all is well because santa dropped by to cheer me right up ! huge thanks to konstantinos for telling me about the eBay seller for these, i saved 200$!