2005 Acura RL Opulent Blue Pearl Build
#1
Cruisin'
Thread Starter
2005 Acura RL Opulent Blue Pearl Build
Hey Guys, this is my first post on AZ. I have a 2005 RL I got about a year ago and so far I have a Cosmo Racing CAI and two of the four resonators deleted and also replaced the stock mufflers with Magnaflow 14829 after hearing a YouTube video of it with those mufflers (I also have done some electronics mods like a 2 way remote start/alarm and subwoofers that I will post on a different thread I guess?). I must say I'm pretty happy with the results. It sounds good when accelerating but pretty quiet when cruising. I have noticed that it is loud at around 2k rpm. As soon as you're over 2k rpm it gets quiet almost instantly. I have a few videos of both the resonator delete with stock and magna flow mufflers. Let me know if you guys want to hear it, I'll upload them to YouTube and post a link. The attached pictures are of the Magnaflows and straight 2.5" pipe all the way to the first two resonators.
#2
Cruisin'
Thread Starter
Mod List
Hey Guys,
Here's a short list of the mods I have done so far. I tried to put them in my signature but apparently, there is a 5 line limit, so I am putting them up here and putting a link to this thread in my signature. I'm sure I forgot something and I will keep this thread updated as I progress. I am going to dig up pictures of the mods in this list when I was installing them and post them later. For now, here's the list:
-Cosmo Racing CAI
-Magnaflow 14829 Mufflers
-6000K HID Hi-Beam
-LED Fog Lights
-LED Interior Lights
-Avital 5303L 2 Way Remote Start/Alarm
-iSimple Gateway (PXAMG) with ISBT21
-Dual 10" Pioneer Subwoofers in Custom Enclosures
-20% Tint All Around (except Windshield)
-Mini 0803 Dashcam (hardwired)
-Dual Wolo Bad Boy Horns
-Carbon Fiber Vinyl Wrapped Hood
-Carbon Fiber Vinyl Wrapped Shifter Trim + Cup Holder
I did put the carbon fiber vinyl in the list as a "mod" but I know someone is going to give me grief about that so just so you guys know, I could have put plastidip on the list too but I left it off!
Here's a short list of the mods I have done so far. I tried to put them in my signature but apparently, there is a 5 line limit, so I am putting them up here and putting a link to this thread in my signature. I'm sure I forgot something and I will keep this thread updated as I progress. I am going to dig up pictures of the mods in this list when I was installing them and post them later. For now, here's the list:
-Cosmo Racing CAI
-Magnaflow 14829 Mufflers
-6000K HID Hi-Beam
-LED Fog Lights
-LED Interior Lights
-Avital 5303L 2 Way Remote Start/Alarm
-iSimple Gateway (PXAMG) with ISBT21
-Dual 10" Pioneer Subwoofers in Custom Enclosures
-20% Tint All Around (except Windshield)
-Mini 0803 Dashcam (hardwired)
-Dual Wolo Bad Boy Horns
-Carbon Fiber Vinyl Wrapped Hood
-Carbon Fiber Vinyl Wrapped Shifter Trim + Cup Holder
I did put the carbon fiber vinyl in the list as a "mod" but I know someone is going to give me grief about that so just so you guys know, I could have put plastidip on the list too but I left it off!
#3
Cruisin'
Thread Starter
Here's a link to a quick exhaust clip with Dual Magnaflow 14829 Mufflers and 2/4 Resonators deleted.
Last edited by bzhitnitsky; 03-06-2015 at 01:57 AM. Reason: video embedded twice
#6
Senior Moderator
I'm interested in the wrapped hood, but I can't say I'll like it.
#7
Cruisin'
Thread Starter
NathanJax,
I installed the subwoofers last year so I will have to dig up photos of the installation. In the meantime, here's a picture of the finished product:
I was inspired by oo7spy's woofers when I made these boxes!
I like that my trunk is still functional and I have all the bass I want!
The Amp is mounted on the back of the left woofer (I made the boxes shallow to put the amp behind) and since this photo was taken, I also mounted a 20 Farad (way overkill but I had it already) capacitor on top of the left woofer.
I will take a new picture and dig up the pictures of the install and post them later.
oo7spy,
I was unsure about the hood as I don't want to turn my RL into a ricer, however; after I wrapped and installed it, I love it! I don't think it is very noticeable, but it think it makes my RL unique. To each his own though
Here's pictures of the process, and the finished product:
Here, I just removed the hood and got a shot of my hoodless whip
Here I put it on two sawhorses in my living room and removed the wax and dirt and started wrapping it.
Here is the hood completely wrapped without the chrome trim piece installed.
I worked out the bubbles and creases and put the hood back on the car.
Here's the final product. I think the carbon fiber looks modest yet cool on a OBP RL, but to each his own!
While I'm at it, here are some pictures of the vinyl wrap I did on my shifter trim and cupholders. My shifter trim was discolored from the previous owner when I got it and wouldn't wash off. I decided to try the vinyl wrap with what I had left from the hood wrap:
Shifter trim and cupholder removed
In the process of wrapping the shifter trim in vinyl
Shifter trim vinyl wrap finished
[IMG]https://cimg7.ibsrv.net/gimg/acurazine.com-vbulletin/922x836/80-1726_edit_5ed9eb5c9f584a3b1a258ef2d2a682b474afe09e .png[/r trim vinyl wrap finished
RL Shifter trim, cupholder, and center console vinyl wrapped and installed
All Done! Let me know if you have any questions or If you would like any more pics.
I installed the subwoofers last year so I will have to dig up photos of the installation. In the meantime, here's a picture of the finished product:
I was inspired by oo7spy's woofers when I made these boxes!
I like that my trunk is still functional and I have all the bass I want!
The Amp is mounted on the back of the left woofer (I made the boxes shallow to put the amp behind) and since this photo was taken, I also mounted a 20 Farad (way overkill but I had it already) capacitor on top of the left woofer.
I will take a new picture and dig up the pictures of the install and post them later.
oo7spy,
I was unsure about the hood as I don't want to turn my RL into a ricer, however; after I wrapped and installed it, I love it! I don't think it is very noticeable, but it think it makes my RL unique. To each his own though
Here's pictures of the process, and the finished product:
Here, I just removed the hood and got a shot of my hoodless whip
Here I put it on two sawhorses in my living room and removed the wax and dirt and started wrapping it.
Here is the hood completely wrapped without the chrome trim piece installed.
I worked out the bubbles and creases and put the hood back on the car.
Here's the final product. I think the carbon fiber looks modest yet cool on a OBP RL, but to each his own!
While I'm at it, here are some pictures of the vinyl wrap I did on my shifter trim and cupholders. My shifter trim was discolored from the previous owner when I got it and wouldn't wash off. I decided to try the vinyl wrap with what I had left from the hood wrap:
Shifter trim and cupholder removed
In the process of wrapping the shifter trim in vinyl
Shifter trim vinyl wrap finished
[IMG]https://cimg7.ibsrv.net/gimg/acurazine.com-vbulletin/922x836/80-1726_edit_5ed9eb5c9f584a3b1a258ef2d2a682b474afe09e .png[/r trim vinyl wrap finished
RL Shifter trim, cupholder, and center console vinyl wrapped and installed
All Done! Let me know if you have any questions or If you would like any more pics.
The following users liked this post:
oo7spy (03-06-2015)
Trending Topics
#8
Interior looks good.
Any suspension or wheel plans?
Any suspension or wheel plans?
#9
Cruisin'
Thread Starter
I think I am going to get 20" rims for summer. I would love to get Vossen CV3's (http://nolimitbmore.com/work/acura-rl-with-vossen-wheels/) but they're a bit out of my price range at the moment. My second choice would be Gunmetal Grey TSW Nurburgring's but I really love the look of the thin, 5 spoke wheels like the CV3's. If I don't get new rims or get something smaller than 20", then I might get H&R lowering springs. I live in the suburbs of Philadelphia and our roads are destroyed from all the salt, snow, ice, brine, plows, etc. I think lowered on 20" rims will destroy my rims and suspension. What do you think?
#10
I drove my Lexus LS with 19s SSR Viennas, full coilovers, on 275 rubber. Had it in St Louis and Boston. Used to come down to UPenn all the time to visit my sister. Only issue was the stupid cobblestone roads in one area of Philly.
If you have some decent rubber on 20s, it should be fine.
To me the cost of spring+shock=coilover, and I prefer having height adjustment.
If you have some decent rubber on 20s, it should be fine.
To me the cost of spring+shock=coilover, and I prefer having height adjustment.
#11
Senior Moderator
^Unfortunately for the RL, coilovers = $2k. You can get a full suspension setup for $550 (KYB + H&R), $650 (ASpec) or $850 (stock with H&R springs).
The RL tires are beefy. You should be able to get enough sidewall with 20"s to protect the wheels. Lowering on your current struts would probably cause a quick failure, but they almost certainly need to be replaced anyway. I don't see why lowering the car on bad roads will hurt the suspension.
The RL tires are beefy. You should be able to get enough sidewall with 20"s to protect the wheels. Lowering on your current struts would probably cause a quick failure, but they almost certainly need to be replaced anyway. I don't see why lowering the car on bad roads will hurt the suspension.
Last edited by oo7spy; 03-06-2015 at 01:52 PM.
The following 2 users liked this post by oo7spy:
2012wagon (03-06-2015),
bzhitnitsky (03-06-2015)
#12
Cruisin'
Thread Starter
How much lower is the ASpec? Can these still be ordered? I think the ASpec body kits are discontinued so thats why I ask. I was looking for a ASpec front lip forever and can't seem to find any for sale online. Do you think that lowering on the current struts would cause a failure because of their age? If I got replacement struts and H&R springs, it would work fine right? Also, could I damage anything by replacing just the springs for now and then getting struts when these fail?
#13
Cruisin'
Thread Starter
Vehicle for Sale!
This vehicle is now for sale on the Forum, as well as eBay as I am looking for a Station Wagon / Hatchback:
https://acurazine.com/forums/member-.../#post15404098
http://www.ebay.com/itm/Acura-RL-Base-Sedan-4-Door-/251920891448?forcerrptr=true&hash=item3aa7a7be38&i%20tem=251920891448
PM me for more info or if anyone has any questions or would like a test drive!
https://acurazine.com/forums/member-.../#post15404098
http://www.ebay.com/itm/Acura-RL-Base-Sedan-4-Door-/251920891448?forcerrptr=true&hash=item3aa7a7be38&i%20tem=251920891448
PM me for more info or if anyone has any questions or would like a test drive!
Thread
Thread Starter
Forum
Replies
Last Post
rockyboy
2G RDX (2013-2018)
46
01-25-2016 06:00 PM
handsom-hustla
Car Parts for Sale
70
11-13-2015 05:04 PM
nuldabz
3G TL Tires, Wheels & Suspension
3
09-03-2015 05:49 PM