Front spoiler installed!
#1
Instructor
Thread Starter
Front spoiler installed!
Took longer than expected to remove the lower black plastic grille.
Total of two hours to install. Pretty happy about the result.
The following 2 users liked this post by hhrdx08:
ACCURATEin (05-09-2013),
Gavin Sam (12-10-2020)
#3
mrgold35
07-09 front grill + front spoiler = love at first sight
#5
http://acura.bernardiparts.com/Image...r_BII39553.pdf
#6
Instructor
Thread Starter
This is the exact installation guide I used.
Like it said the use of an assistant really helped a lot when removing and reinstalling the bumper. Also thanks to another Acurazine member who mentioned start pulling the bumper off from the outer corners of the headlights...
I used a Bent Nose Plier to remove the clips, makes the job easier. hth
Like it said the use of an assistant really helped a lot when removing and reinstalling the bumper. Also thanks to another Acurazine member who mentioned start pulling the bumper off from the outer corners of the headlights...
I used a Bent Nose Plier to remove the clips, makes the job easier. hth
Here is the install guide - doesn't look too difficult.
http://acura.bernardiparts.com/Image...r_BII39553.pdf
http://acura.bernardiparts.com/Image...r_BII39553.pdf
Trending Topics
#10
I like the wheels too. Good job hhrdx08.
#11
Instructor
Thread Starter
If you are located in the States, you have better options to get Acura accessories than if you are in Canada.
Many online vendors sell lower prices than Acura dealers.
Many online vendors sell lower prices than Acura dealers.
#12
Instructor
Thread Starter
#14
Instructor
Thread Starter
Thanks, I got it from a fellow member:
https://acurazine.com/forums/1g-rdx-2007-2012-147/excitement-turns-disappointment-835871/
https://acurazine.com/forums/1g-rdx-2007-2012-147/excitement-turns-disappointment-835871/
Last edited by hhrdx08; 01-16-2012 at 12:33 PM.
#17
1st Gear
Join Date: May 2012
Location: Ontario, Canada
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
That looks amazing! I really want to order one. I would love to see one that is installed. The pictures look great but I need to see what they look like in person before I spend the money. Is there anyone in the London, Ontario area that has one installed that I could take a look at?
#18
That looks amazing! I really want to order one. I would love to see one that is installed. The pictures look great but I need to see what they look like in person before I spend the money. Is there anyone in the London, Ontario area that has one installed that I could take a look at?
#20
Instructor
Woah, I agree...where did this come from. It looks to be a front spoiler. Very nice job.
Now you have to share....hehe...how did you do it Crazycated?
I've been thinking of adding a spoiler and/or splitter to get more downforce in the front (she is still understeering).
This would be a good start.
Now you have to share....hehe...how did you do it Crazycated?
I've been thinking of adding a spoiler and/or splitter to get more downforce in the front (she is still understeering).
This would be a good start.
#21
Instructor
Guys this is not a lip... Its garage door bottom seal. they sell it at home depot Its easy to install... I bought some a few months ago just didn't have time to install plus I didn't think it was gonna look good.. But I guess I was wrong!
Thanks Crazycatted for posting picture might do this this weekend.
http://www.msprotege.com/members/buit9110/hdp%20lip.jpg
Thanks Crazycatted for posting picture might do this this weekend.
http://www.msprotege.com/members/buit9110/hdp%20lip.jpg
#22
Guys this is not a lip... Its garage door bottom seal. they sell it at home depot Its easy to install... I bought some a few months ago just didn't have time to install plus I didn't think it was gonna look good.. But I guess I was wrong!
Thanks Crazycatted for posting picture might do this this weekend.
http://www.msprotege.com/members/buit9110/hdp%20lip.jpg
Thanks Crazycatted for posting picture might do this this weekend.
http://www.msprotege.com/members/buit9110/hdp%20lip.jpg
#24
I am stuck outside my house posting from my iPhone I will post the website where I got it from I soon as I get in my house waiting for my mom to bring me a spare key .
#25
I was looking at the picture that zerogravity posted I guess they have a resemblance don't no the quality of the door seal you guys decide here is the website ezlip.com let me know what you guys think .
The following users liked this post:
b20sivtec (11-17-2013)
#26
I was just told by the person that referred me to the website that material used on the garage door seal is different to the ez lip they use better material and sticks better than the garage door seal . After time the garage door seal will fall.
#27
Instructor
Cated check this link out.
http://legacygt.com/forums/showthrea...r-156922.html?
http://lmgtfy.com/?q=Garage+Door+Lip
http://legacygt.com/forums/showthrea...r-156922.html?
http://lmgtfy.com/?q=Garage+Door+Lip
Last edited by zerogravity; 05-29-2012 at 06:06 PM.
#31
not an SUV ...a Big Hatch
well i dig it.
clean, matches the front spoiler's look too, and I'm sure it will in fact function.
Windy conditions will make most things bend. In the STi i had, the hood/scoop would bulge and rear spoiler would also in very windy conditions (driving into heavy winds in the foothills below cajon pass on the 15 fwy).
Let us know how it holds up!
clean, matches the front spoiler's look too, and I'm sure it will in fact function.
Windy conditions will make most things bend. In the STi i had, the hood/scoop would bulge and rear spoiler would also in very windy conditions (driving into heavy winds in the foothills below cajon pass on the 15 fwy).
Let us know how it holds up!
#33
#35
tehLEGOman
Join Date: Dec 2004
Location: Charlotte, NC
Age: 40
Posts: 9,135
Received 1,982 Likes
on
1,335 Posts
Looks good. You should run some gunmetal TE37s.
#38
Intermediate
Join Date: Apr 2009
Location: Port Moody BC "Wet Coast"
Age: 57
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
I realize a pump to an old thread but where did you order this from locally as I am in Port Moody, just got a 2010 RDX, after trading my 08 TL Type S on it, second RDX I have owned. yes I miss the TL Type S but I put too many miles on to keep a car longer than 3.5 yrs, and honestly the fwd was getting old , biggest downer of the TL, fwd